Model #462 SHOP VAC Vacuum cleaner

  • Head Filter Assembly
    3 Results
  • Frame Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

when dryer first starts I get a harsh metal to metal sound as drum turns. DHDSR46GE1WW Ge Gas dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Henry -
June 06, 2013
A:

Thank you for submitting your question. I know the noise you're hearing is very disconcerning and I will be happy to assist you. You could be experiencing an issue with the drum felt and guide (WE9M30) or the drum bearing (WE1M462). Pull the dryer out so you can get to the back wall of the dryer to check the axle bearing mount in the center of the back panel. Remove the front panel and then the drum from the cabinet and examine the drum bearing (image below). If the drum bearing is in good condition, then the issue will be with the felt and guide. You should be able to see wear and tear on the felt and guide. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
June 07, 2013
A:

How do I put the dryer top back on?

Read More
Nancy -
June 19, 2015
See more answers
Q:

Dryer drum bearing for Ge Gas Dryer model #DWSR405GB0WW DWSR405GB0WW Ge Gas dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model WE1M462; there would be a drum slide that goes with the drum bearing. Click here for diagram. The drum slide is key number 316.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 11, 2015
Q:

i have some problems with my whirpool oven Sf462lxsb0 Whirlpool Free standing gas

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the oven is not working on this Whirlpool gas range. I know how frustrating that is to have happen.

Check broiler burner to see if it ignites properly. If the broiler works, then I would suspect the igniter for the bake to be the issue. If the broiler also doesn’t work, you could have a failed electronic oven control board or a wiring failure in the circuit. You would need to test the igniter wire connections to ensure there is voltage being supplied to them. If not, it’s likely the electronic control is at fault.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 23, 2014