Model #45-02101 AGRI-FAB Spreader

  • Broadcast Spreader
    3 Results
Find part by diagram >

Question and Answers


Agrifab spreader not turning 45-02101


I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Yadira B -
December 08, 2012

Thank you for your question.

I am sorry you are having a problem with the spreader. If you can turn the unit over and turn the wheel and it works I recommend lubing the bushings. The image below shows where to lube. Just click on the image to enlarge it. If the area where the axle passes are dry the friction can cause the gears not to turn. Just apply some penetrating oil in the locations shown in the image. Then work the axle until they free up. Once they are free, go ahead, tip the unit back over, and check the operation.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.


Read More
Mark T -
Sears Technician
December 10, 2012
See more answers