Model #44595 CRAFTSMAN Wrenches and Accessories

  • Torque Wrench
    3 Results
Find part by diagram >

Question and Answers

Q:

torque wrench - leaking oil

A:

The torque wrench having an oil leak problem sounds inconvenient. I did manage to find a link in where you can purchase a new torque wrench which are not very expensive and most of them are on sale. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
February 23, 2012
A:

Thank you for the quick response. I went to the link and found out they are discontinuing the model I have. It also sounds like the new version is not made in the USA. There were 3 reviews and none of them good. The 3rd review, said they have the same model as the one I am using, and it is also leaking oil. They are still using it, but also are not sure if it is also accurate. It will be interesting to see what they say about the leaking oil.

Read More
richard -
February 23, 2012
A:

To repair the torque wrench it would need to be sent to Sears Specialty Repair. You can go to Home Services to get information about sending the wrench in for repair.

I feel sure the accuracy of the torques wrench will be compromised by the oil leakage.

I just checked on E-Bay and saw a wrench like yours new and in the box for $81.94. I think the best bet is to replace the torque wrench.

I am sending you a link to the E-Bay page.

Torque Wrench

Read More
Jimmy K -
Sears Technician
February 24, 2012
See more answers
Q:

How to put a torque wrench back together

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
October 31, 2011
A:

Thank you for your question on the torques wrench.

I cannot find information on this torque wrench. I have no visual on component parts.

Most of the Microtork wrenches have stock numbers like 44595, 45282, and so on.

If most case you will need to send the unit in to be repaired and calibrated.

The Sears tool repair center in Dallas is where I sent mine for recalibration if they are still doing this type of repair.

Take the tool to the store and they can send it to Dallas Texas for repair.

There will be a charge but I do not know how much but the store can give you an idea of what it will cost.

Please let me know how it went with the repair.

Sam A.

Read More
Sam A -
Sears Technician
December 07, 2011
See more answers
Q:

Calibration sheet needed for torque 9-44595

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
aashe -
November 16, 2011
A:

We do not have calibration instructions for torque wrenches. Torque wrenches are repaired and calibrated at Sears Specialty Repair. You will need to take the torque wrench to a Sears Service Center for calibration. You can go to Home Services to find the nearest location.

Read More
Jimmy K -
Sears Technician
November 18, 2011
See more answers

Top Parts