Model #4350 DIRT DEVIL Vacuum, Canister

  • Assembly Schematic-4350
    3 Results
  • Wiring Schematic-4350
    3 Results
Find part by diagram >

Question and Answers

Q:

how to change door cam 79571309012 Kenmore Refrigerator

A:

I know that it can be very frustrating to have issues with your refrigerator cam shaft. I was not able to located the spring that you are asking about. The only part that I would find was the cam shaft itself. If the spring is not broken on the other one, then I would suggest you move it to the new one. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 25, 2013
A:

the doorcam broke off do i have to order that part or something esle? the part has a screw in it when it fell out and both have fallen off on each door

Read More
mary -
November 19, 2013
A:

There are five parts that make up this part of the door. These include two stoppers, the busihing, the snap ring and the screw. If you still have the screw, do not lose it. It is specially made for this. From what you are decribing, however, it sounds like you need the other four parts. These are parts numbers: 4620JJ3006C, MJB63029901, 4984JJ3003A and 4350JA3005B. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 19, 2013
A:

I have had to either have this part repalced 3 times, and I am scheduled for another replacement, under a new warranty that I just purchased. But in order to replace the cam at the top of the door, you have to replace the whole door gasket, it is all connected together. I wathched how to do it on u-tube, and have done it my self, 2 times, once on each side. The whole gasket assembly cost over $100.00. for the right side and just under $100.00 for the left side, why I don't know, they are both the same size. My reifgerator is 1 year and 8 months old, and this will be the 4th time for replacing the cam, with the whole door gasket assembly. That is why I jus purchased an extended warranty, for if it keeps breaking every 3 to 4 months, it will be worth the price of the warranty,a nd I won't have to install it myself.

Read More
Anonymous -
August 08, 2014
A:

In my case, I had the cam flapper break off of the right door. You DO NOT have to buy a whole new gasket! It's the piece, called the holder gasket, that the cam mounts on, that broke. I bought a replacement part (#4930JJ2028A - right side holder gasket - $25) and googled "Fridge Right Door Gasket Replacement �?? LG Refrigerator Repair (Part #4987JJ2002S)" - the part number is wrong in my case BUT the YouTube video is VERY good and helpful. Hopefully you will still have the screw (not included with a new cam flapper - if needed) to attach the old cam flapper to the new holder gasket. Note the position of the parts on the holder gasket - I took phone pix. The old holder gasket slides off the removed gasket and you remove a bottom screw to release a rod holding everything in place. Reassemble with rod from bottom and attach the cam flapper from the top. Once you remove the gasket and see everything, all this will make sense. It took me about 15 min. I hope this helps you make the repair and save some money.

Read More
mark -
March 08, 2015
See more answers
Q:

LG Model# LDC22720SW Refrigerator door sags

A:

I can understand how the doors sagging can be a big inconvenience, while you wait for the expert to answer i would suggest for you to look at the link down bellow. I hope that it helps and gives you some useful information.

Read More
celene -
October 19, 2010
A:

I can understand your frustration when the doors won't close properly. The information you have already received is correct about leveling the cabinet and using the top door hinges. The most common problem with doors sagging or not aligned properly is because the cabinet is not level. Follow the information listed in the owner's manual to level the cabinet and be sure to use a level. If the doors still sag, loosen the top hinges and try to make an adjustment as listed. If this still won't work, then the door will need to be shimmed up. There are some clips for this purpose. These clips # 4350JA3005B are available at SearsPartsDirect . See attached picture and instructions for installing these clips. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
October 21, 2010
A:

Thank you both very much for your time and info. I'll try your suggestions and see what happens. I'll probably be attacking this issue within the next week or so.. SO, when I get done, I'll repost results. 'cow

Read More
The Madcow -
October 23, 2010
See more answers
Q:

stackable kenmore washer and dryer model #41799980120

A:

The replacement belt is between $43-50 plus shipping. If it is the motor too since the drier will not power up at all it seems more logical to just buy a replacement set when considering costs. What do you think?

Read More
j4whatisrt -
September 17, 2010
A:

Not having the convenience of your dryer can be frustrating. I researched your question and found someone was experiencing similar problems with their dryer. An expert posted a general answer as to why this may happen. I also included the Sears.com website so you can compare prices of dryers and find one that best fits your budget. Another suggestion I have is to provide more specific details this will help an expert better diagnose the problem and provide you with a better answer. Just add to this thread. I hope this helps!

Read More
Jacqueline S -
September 17, 2010
A:

From the description you give the drum is not tumbling but I'm less clear on if the motor is running.

The belt is the first thing to check. There are a couple of different access points where the belt can be checked. The top of the dryer can be removed and the belt can be visually checked.

The best view point is obtained by removing the small square panel on the back of the unit. This allows motor and belt access.

If the 5304439725 belt is off or burnt then a do-it-yourself belt change would be next. The belt, or any part, can be obtained from the following link: Sears PartsDirect .

If it will not power up at all then checking the circuit breaker would be first thing to check.

If everything is completely dead then it is likely a volt/ohm meter will be needed to determine what is wrong. If you don't have a meter or know how to use one then I would suggest a technician check this dryer.

What's curious about this problem is that a shoe shouldn't have caused this type of problem.

Check the belt and reply with any additional detail for further assistance.

Read More
Fred M -
Sears Technician
September 18, 2010
A:

Ok, update folks. The motor is running and the heating element works. The inability of the drier is that the drum will not tumble. It just stays in place. Secondly, I tried to get to the belt or what I thought it was from the inside as there are four screws. I loosened something by loosening it-the heating element? and found that I could not get into anything from the inside of the drier. I moved the unit away from the wall and it pulled off the return hose to the washer. It seems like it is corroded and needs replaced or at least the part that runs off the washer. Is this piece easy to replace? I tried putting a bucket down below as I tried to do a load and water ended up everywhere. Also it looks as though on that back side there are a couple vents I could open by undoing some screws but not sue which one so I could get the drum repaired? I do have a manual and the washer/drier set were purchased in 1991 and the model number for them is 41799980120. Thanks!

Read More
j4whatisrt -
September 28, 2010
A:

You may have already recieved an answer to a follow up question with information telling you how to access the belt of the dryer and how to remove the panel on the washer so further checks can be made. If you still have questions then reply with any questions you have.

Read More
Fred M -
Sears Technician
September 29, 2010
See more answers