Model #4260 MUSKIN Swimming Pool Accessories

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

F5 01 Error Code on Kenmore Elite range after replacing clock timer

A:

Getting error codes on appliance can be very concerning especially not knowing what they mean and why they are popping up. While you are waiting on the expert answer I searched your question in the Manage My Life website and found general answers to your question. I have attached the link below. Hope this helps!

Read More
Dezeray S -
March 08, 2011
A:

I apologize for the problems you and the folks you sent posts from have had.

The new clock you received has had different software added to it. This clock will not communicate with the original user interface board or the power relay board.

A kit will have to be installed that includes a new clock, user interface board, and power relay board. The part number for the kit is 5304455004 and the cost is $266.80.

Contact Sears Parts Direct at 1-800-252-1698 and ask them to let you return the original clock and send you this kit.

Read More
Jimmy K -
Sears Technician
March 08, 2011
A:

I just ordered the new part. Thank you so much for your help Jimmy K! I sincerely appreciate it!

Read More
Brian -
March 21, 2011
A:

Foremost, I do appreciate your help Jimmy K. Thanks again for the help you gave me a couple years back on my range. Well, I was able to get by with it for a while. After installing part #5304455004, it worked for about a year until I started getting an F-13 code when attempting to use broil. After disconnecting the power supply to the range, waiting a few minutes and reconnecting, I still get an F-13 when trying to broil. So my wife and I went without broil for about a year and I'm just getting around to fixing it today. From reading other posts, it sounds like I need to replace that same part again (5304455004). This is frustrating to me because it is such an expensive part to purchase, the current list through sears parts direct is $270.17 and this is the second time I've had to replace it. I went ahead and ordered it, but again, I am pretty frustrated by the fact that this part keeps going out. I just thought I would post this on here in the hope that you may be able to suggest any alternatives. Do you think that it may be worthwhile to speak to someone at Sears Parts Direct customer service about the issues I've had with this part? Thanks again! -Brian

Read More
Brian -
August 20, 2013
A:

Thank you for choosing ManageMyLife.com. I understand how frustrating it can be when a fairly new part malfunctions in your range. I would recommend checking the connections to the board to make sure all is secure and not damaged. If you wish to speak with a representative concerning this part, I recommend calling 1-800-469-4663. They will have the information on whether there has been any more updates or recalls on this particular part.
I hope we can help you with any other questions and repairs in the future. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 16, 2013
See more answers
Q:

How do you install GE dishwasher plunger sw1 & spring plunger into interlock switch?

A:

Good afternoon.... I can appreciate your efforts in getting those two parts you did not receive. Your request will be forwarded to an expert who will investigate the matter further. They should be able to send you instructions for installation within the next two business days if not much sooner. Until then, have a nice Sunday

Read More
Henry -
November 18, 2012
A:

The information in the images below may be helpful to you. The first image contains a diagnostic test which may prove useful in resolving this problem. You say the plunger and spring were missing and I believe that may be normal. I believe the plunger and spring were discontinued on later models. The 2nd and 3rd image contain more information. I hope this helps. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
November 20, 2012
See more answers
Q:

How to reset GE dishwasher?

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Yadira B -
November 18, 2012
A:

While some dishwashers in the past could be "reset" by running a diagnostic test this is not one of those models. There is a diagnostic test for this model and it is shown in the image below. You can run the test and check the various parts. I hope this helps. You can reply with any additional details for further assistance. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
November 19, 2012
See more answers