Model #4220 SINGER Mechanical Sewing Machines

  • Light Bulb Assembly
    3 Results
  • Covers
    3 Results
  • Covers
    3 Results
  • Rotating Hook/bobbin Case
    3 Results
  • Thread Tension/arm Shaft
    3 Results
  • Arm Shaft Horizontal
    3 Results
  • Arm Shaft Horizontal
    3 Results
  • Bobbin Winder/feed Connection
    3 Results
  • Feed Rock Shaft
    3 Results
  • Feed Lifting Lever
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Pattern Selector
    3 Results
  • Patter Selector
    3 Results
  • Needle Bar/presser Bar
    3 Results
  • Needle Bar Frame
    3 Results
  • Needle Bar/presser Bar
    3 Results
  • Needle Bar/presser Bar
    3 Results
  • Needle Bar Frame
    3 Results
  • One-step Buttonholer
    3 Results
  • One-step Buttonholer
    3 Results
  • Needle Bar/presser Bar
    3 Results
  • Handle
    3 Results
  • Accessories
    3 Results
Find part by diagram >

Question and Answers

Q:

Motor drive.gear 4220 Singer Sewing machine

Q:

Garage Door Opener 13953635SRT

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your garage door opener. Upon researching model 13953635SRT; it sounds like there could be an issue with the logic board. The humming could be coming from the motor. The motor shouldn’t have any power unless the button is pressed. See if the learn button is blinking. The learn button is on the back of the garage door opener. The learn button could flash a code if it recognizes the issue.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
May 11, 2015
A:

I need to replace the plastic gear on the lower part of the sprocket assembly (the mate to the worm gear). I also need to replace the bushing which is at the top of the shaft of the gear & sprocket assembly. Can you tell me if a new bushing is included in the worm gear kit (part # 41A2817) so that I don't have to spend money getting the gear & sprocket assembly (part #41C4220A) which is more expensive??

Read More
Mike -
September 16, 2015
A:

my garage door will shut then opens right away

Read More
jamie -
September 16, 2015
See more answers
Q:

Repairing opener part number 41A4315-7d 13953834SRT3 Craftsman Garage door opener

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Garage door opener.

I can understand the frustration of your garage door not functioning properly, after researching model number 139.53834SRT3. The part number 41c4220A is guaranteed to fit this model.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 06, 2015