Model #41799985120 KENMORE Laundry Centers/Combos

  • Dryer, Cabinet, Drum, Heater
    3 Results
  • Dryer, Motor, Blower, Belt
    3 Results
  • Console & Controls
    3 Results
  • Washer-cabinet, Top Panel, Base
    3 Results
  • Washer-tubs, Hoses, Motor
    3 Results
  • Transmission
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I access the pump hoses on my Kenmore laundry center?

A:

To get to the pump hoses (with the unit still unplugged), take the metal clips (Key 44 in the image below) off of the front and back of the pump. The back clip is not readily visible. You will need to reach behind the pump to access it. Be careful, internal metal edges can be sharp. Protective gloves are recommended.

Once you get the clips off of the pump, you should be able to loosen the pump from the motor shaft. Wriggle the pump outward a bit so that you can access the hose clamps and remove the hoses.

This should give you the access that you need to check the hoses without further disassembly. Hopefully you will be able to find and correct the source of your draining problem.

If you need more help with this washer repair, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
May 05, 2008

Top Parts