Model #41799463100 KENMORE Laundry Centers/Combos

  • Dryer-cabinet, Drum, Heater
    3 Results
  • Dryer-motor, Blower, Belt
    3 Results
  • Console & Controls
    3 Results
  • Washer-cabinet, Top Panel, Base
    3 Results
  • Washer-tubs, Hoses, Motor
    3 Results
  • Transmission
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Is this model gas or electric? 41799463100 Kenmore Laundry center

A:

Thank you for being Sears' valued member and for contacting SearsPartsDirect.com with your question about whether Kenmore Laundry Center model 41799463100 is gas or electric. I will be happy to help you with this.

This is an electric unit. The way to determine this is by looking at the heating method of the dryer. If it was a gas unit, it would have a burner assembly. Because this model has a heater assembly with a heater coil, it is an electric model.  

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
October 06, 2014
Q:

Can I please have a high resolution wiring diagram of my Kenmore laundry center?

A:

Please see the image provided below for sample wiring diagrams of the 417 Kenmore laundry center.

Read More
biker dave -
Sears Technician
December 03, 2009
Q:

My 417.99463100 Washer dryer combo stacked won't turn on the heater to dry I've replaced 15, 33,36. My important question is: Is there a failure rate with this switch? I can't imagine that ther...

A:

Thank you for letting us know where you found the problem at. The motor switch contacts for the heating element carry a load of around 20 amps. Over years of usage the contacts will pit & then start arcing creating a poor connection. This will cause the switch to fail & heat up the wiring to & from the heating element. This is not rare for a unit of this age. I recommend replacing the wiring harness part number 5303209919 & the motor part number 5303209662.

The reason why we changed your title question is because it was not a question.

Read More
biker dave -
Sears Technician
November 30, 2009

Top Parts