Model #41797812701 KENMORE Laundry Centers/Combos

  • Upper Cabinet/drum Heater
    3 Results
  • Motor/blower/belt
    3 Results
  • Control Panel
    3 Results
  • Lower Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Transmission
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washer won't stop filling 41797812701

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore washer.

I can understand the frustration of your washer not functioning properly, after researching model number 417.97812701. The most common part to cause this issue with the water inlet valve. It seems like the valve is not shutting allowing the water to continue to run in. I would suggest replacing the valve to fix the issue.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
August 11, 2015
Q:

How to replace belt tensioner 41797812701 Kenmore Laundry center

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to replace the tensioner on your unit. I did look into the model number you have provided and I have found information to assist you. 

I have attached the images for the washer and dryer. Let me know if this helps.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
July 10, 2014
Q:

washer will not agitate 41797812701 Kenmore Laundry center

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the washer not agitating.
 
Glad to help out.   Im  looking at your Kenmore Washer model number 41797812701.

First thing to check and you can verify with an ohm/volt meter if you have the experience in using one.   Check the lid/lock switch.  
The lid switch has to be closed for the drain and spin cycle on your washer to work. If the lid switch is faulty, it will fill and wash but nothing else.

A quick check you can do is to jump the lid switch and see if it will drain. If the washer operates, the lid switch needs to be replaced.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 30, 2014

Top Parts