Model #41744102300 KENMORE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/door/top
    3 Results
  • Tub/motor
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Will stack kit 5303937141, mount dryer with washer?

A:

Core Issue: Will stack kit 5303937141, mount dryer with washer?

Resolution: In order for washer and dryer to be stacked, washer and dryer must be compatible. Based on the information you provided, the washer and dryer are not compatible and cannot be stacked.

Read More
Maria M. - Personal Solutions Manager -
Sears Technician
July 27, 2009
A:

I have a stackable washer & dryer kenmore need to separate so I can move them. They are connected . Model 417.83042300 Dryer & washer 417.44102300. I was told to unscrew from back but can't get to screws can you move dryer forward so you can access screws don't want to break anything. How do you get to screws and under dryer on top. Barbara

Read More
Barbara -
November 07, 2015
See more answers
Q:

Are all 417. series stackable washers & dryers compatible? 41742142100 Kenmore Washer

A:

Thank you for choosing SearsPartsDirect.com and for contacting us with your questions about finding a compatible dryer to stack with your washer. I am so sorry the dryer needs to be replaced. I will be happy to help you with this.

The 417 at the beginning of a model number does not indicate a series. It is a manufacturer identification code. In this case it means that the washers and dryers that start with 417 were made for Sears by Frigidaire. The last number of the model number indicates engineering changes that have been made to the model from one production to the next. All 417 models are not compatible. The best way to determine if a dryer will stack with the washer you have is to look at the stacking kit listed for the dryer.

Your current dryer uses a stacking kit that is part number 5303937141. The other dryer you have access to, model 417.81142000 uses the same stacking kit. That means dryer 417.81142000 can be stacked with your washer. Because washers and dryers are normally sold as sets, there is not a reference chart that lists all the dryers that work with your model washer. Any 417 or Frigidaire dryers you find that use the same stacking kit will work with your washer.

I hope this answers your question. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
August 01, 2015
A:

Thank you for the information; I made a mistake when I listed the washer and dryers model numbers (am consolidating appliances between three houses). The washer model number is: 417.44102300 The dryer model number is: 417.82042101 Questions are: 1. Are these two compatible? 2. If they are, what is the stacking kit part number I would need to use?

Read More
Martha -
August 02, 2015
See more answers
Q:

Slack between spider assembley and bearing 41744102300 Kenmore Washer

A:

It's not the Spider but the pulley that I put on and there is slack, which causes the severe banging and vibration.

Read More
Chris -
July 28, 2015
A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you with your washer. Upon researching model41744102300; it sounds like the bearing is worn. There shouldn’t be play between the parts.

Thank you for choosing Sears. We appreciate your business and have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 29, 2015
A:

Thank you for the reply. I'm confident you are correct, considering the new belt didn't help. For this particular model, assuming it's just a warn bearing, which parts will need to be replaced?

Read More
Chris -
July 29, 2015
See more answers

Top Parts