Model #41741042000 KENMORE Residential Washers

  • Control Panel
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Machine stopped spinning, put belt back on, where does the counterweight go? Is there diagram? 41741042000 Kenmore Washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating where the counterweight goes on your washer. 

Click here for videos.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 10, 2015
Q:

The washer runs through the regular cycle in about 3 minutes. Washer will fill then quickly drain and never spin. 41741042000

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 41741042000 and the machines timer uses a speed controller for the machine. I recommend having a trained service technician diagnose the issue you are having. Here is a link that may help little more with your troubleshooting. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
November 17, 2014
Q:

My timer is advancing way to fast. 41741042000 Kenmore Washer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 41741042000 and from your description I would suspect that the timer is faulty. The timer has a gear inside that may be missing teeth on the wheel and skipping thru the cycles. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 23, 2014
A:

Sherman_G Unfortunately I just installed a new $240.00 timer and its still advancing the same as before. My guess is that the control board might be involved. Any thought, board would be $190.00 after tax & shipping & i cant return the timer because its now used for a whole 20 seconds. Thanks, --John

Read More
John -
November 13, 2014
See more answers

Top Parts