Model #41740412702 KENMORE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Front Load Washer Not Spinning.

A:

Providing a model number to your question will help an expert better your search. If you would like to reply back to this thread with a model number I would be more than happy to assist you. Have a nice day.

Read More
Alina F. -
January 23, 2011
A:

The washer is a Kenmore 41740412702. Any assistance is greatly appreciated.

Read More
Jonathan -
January 23, 2011
A:

Thank you for providing the model number. On something like this you will need to have a meter & access to the rear panel to make your checks.

I am sending you a link that covers this type of diagnosis.

The timer advancing like that is normal under these conditions. Once we get the unit fixed the timer will start working properly again.

Please click on the link below. tumble action washer will not tumble what could be the cause

Read More
biker dave -
Sears Technician
January 24, 2011
A:

My Kenmore washer 417481060700 stops spinning during spin cycle when I am washing. I am not sure what part I need to fix this, please help me with understanding what is going on with my washer.

Read More
Jason -
November 24, 2013
See more answers
Q:

Why does my washer not spin out on the final spin?

A:

On something like this I recommend putting the control into a diagnostic test mode so we can view the latest stored error code. Once we know the error code we will have a starting point. From there we can test & replace the failed component. I suspect a door lock failure.

Please see the information provided that explains the test mode set up & error code list.

Read More
biker dave -
Sears Technician
June 17, 2009
A:

This finally looks like I;m getting somewhere, this may sound pretty stupid but where are the LED indicators I hav;nt seen any again the model # is 41740412702 Thanks Eric

Read More
Eric -
February 02, 2012
A:

I tried zooming up to the link u provided but I cannot see

Read More
Reyna -
April 10, 2013
See more answers
Q:

Removing the door hinge 41740412702 Kenmore Washer

A:

Good morning... I can fully understand your interest regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help you replace that hinge and have a nice day.

Read More
Henry -
February 19, 2013
A:

I don't see a link...

Read More
Roger -
February 19, 2013
A:

Sorry, that wasn't what I typed. I don't see any links in the message you left. Thanks anyway for any help.

Read More
Roger -
February 19, 2013
A:


Thank You for Submitting your question to ManageMyLife.com

I can understand the frustration when trying to replace the hinge and not having the instruction to help you complete the repair.

I was able to locate a video of someone completing the repair on a similar model. I hope this helps you!

Video: How to replace door hinge

Read More
Desirea -
Sears Technician
February 19, 2013
A:

Thank you Desirea for responding to my question. I looked over the video and that particular hinge looks pretty easy to replace. The hinge with part number 134264600 goes into and behind the front frame, so removing the hinge screws does not release the hinge from the machine. It appears that the rubber boot around the door entry has to be removed to access the rear of the hinge. But then the boot appears to be sealed. Any additional help would be greatly appreciated.

Read More
Roger -
February 19, 2013
See more answers

Top Parts