Model #416 BOLENS Walk Behind Lawnmower, Gas

  • 21" Rear Discharge Push Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

Dryer shuts off immediately GTUP270EM1WW Ge Laundry center

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer is not working properly.

It sounds to me like the push to start switch is going bad. If you have to hold it to keep the dryer running, then the switch is not making the right contact.

 
WE4M416 is the replacement start switch.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 16, 2015
Q:

Machine Does Not Start HTDX100EM2WW Hotpoint Electric dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer is not working.

Yes, it does sound like a bad switch. I would inspect the wiring to make sure it is not grounding out on something. 

WE4M416 is the start switch.

  
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 23, 2015
A:

When I had this repaired, it was a belt switch that they replaced.

Read More
Robert W -
July 28, 2015
See more answers
Q:

need help putting the switch of a hotpoint dryer back together HTDX100ED0WW

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to put your switch back on your dryer. 

There are three switches that you may be referring to. We would need the exact switch you are trying to re-install.

WE4M415 this is the dryer door switch.  

WE4M404 rotary switch.

 WE4M416 push to start switch. 

I have attached videos that will assist you in accessing the switches and replacing them. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 02, 2015

Top Parts