Model #41516661800 KENMORE ELITE Grill, Gas

  • Gas Grill
    3 Results
Find part by diagram >

Question and Answers

Q:

electric ignition modual.

A:

Grilling season is in high gear and if the grill is not working that does put a damper on outdoor cooking. I located a previous expert post for this model and issue and attached below. It may help while you wait for your expert. If you do need parts a good place to get them for your model is Sears Parts Direct. I also added it below.

Read More
Barbara H. -
June 24, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the grill ignitor. When the button is pushed, you should hear a clicking noise. If yours is not clicking, the problem could be a shorted ignitor or defective module. To determine which is the problem remove the wires on the back of the module and push the button. If you hear the clicking, the module is fine. If there is no clicking the module is defective. I recommend checking the battery connections before ordering the module. Sometimes the connectors will rust. If you find it is rusted you can scrape the connectors with a small screwdriver and then recheck it. the module can be ordered from our parts website: Sears Parts Direct .

Please let me know if you need further assistance on the grill.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 25, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the grill ignitor. When the button is pushed, you should hear a clicking noise. If yours is not clicking, the problem could be a shorted ignitor or defective module. To determine which is the problem remove the wires on the back of the module and push the button. If you hear the clicking, the module is fine. If there is no clicking the module is defective. I recommend checking the battery connections before ordering the module. Sometimes the connectors will rust. If you find it is rusted you can scrape the connectors with a small screwdriver and then recheck it. the module can be ordered from our parts website: Sears Parts Direct .

Please let me know if you need further assistance on the grill.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 25, 2011
A:

Hi Mark, I have the ignition part but need instructions on how to remove the old and install the new one. Grill model 14116682 I can't find repair instructions anywhere. Thom

Read More
Thom -
August 11, 2012
A:

Thom,

I will be happy to assist you. Installing the ignitor can be tricky. First, open the doors to see if you can see behind the knob console. If you can see, the ignitor and you have enough room to remove the ignitor you are in luck. Just remove the button first. Then remove the nut behind the button. The ignitor should come out. Once you have it out transfer the wires one at a time to the new ignitor. Then reassemble the grill in the reverse order.

Chances are you do not have this style. To replace the ignitor on this model you have to disassemble the grill. Usually you can remove the knobs and the console to access the ignitor. I am sorry we do not have any written instructions for replacing the ignitor. Be sure to take pictures as you go. They may come in handy when you reassemble the grill.

I hope this is helpful. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
August 12, 2012
See more answers
Q:

Identifying a replacement part for my Kenmore Elite grill

A:

When it comes to determining the proper parts for an appliance can be rather challenging. While you are waiting for a detailed reply from an expert I recommend visiting the Sears parts direct website were you can view a full parts list and diagram of your model. You also may find a direct number to speak with a parts associate in regards to finding the proper part for your model. I have provided the link below. Hope this helps!

Read More
Priscilla V -
July 19, 2012
A:

Thank you for submitting your question. I believe key #46 the carry over tube is the correct part. The image below is the cleaning instructions for your burners. The instructions will help you access the carry over tubes for removal and reinstalling. The carry over tubes are part number 80015760 priced at $3.29 each. You'll need to order all three pieces if they're damged. You can order parts from our Sears Parts Direct web site. I hope this information helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
July 20, 2012
See more answers
Q:

Regulator hose tread size for a Kenmore Elite Grill (Model number 415.16661800)

A:

I know how important it is to have the correct parts for your grill to make sure they will fit. I did some research and I was able to find a link in where you can enter the model number of your grill and a parts list diagram will pop up. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
June 27, 2012
A:

I've seen that but it does not give the size of the threading that goes from the hose to the pipe delivery.

Read More
Nick -
June 27, 2012
A:

Thank you for your question on the BBQ regulator parts.

You can usually find the regulator hoses at a local Propane retailer store that fills tanks and that also sells BBQ replacement parts.

The fitting should be NPT (national pipe thread).

I would take the part to your local home center or hardware store and you should be able to find the correct size by checking the pipe threaded pieces at the store.

I believe that it is either 3/8 or 1/2 inch pipe thread.

Depending on the regulator they are using it could also be 1/4 inch pipe thread.

I hope this was of some help.

Sam A.

Read More
Sam A -
Sears Technician
June 30, 2012
See more answers

Top Parts