Model #41516110800 KENMORE Grill, Gas

  • Gas Grill
    3 Results
Find part by diagram >

Question and Answers

Q:

Do I need the firebox heat shield in my Kenmore Propane Gas Grill to operate it. Part is on back order and will be for several months

A:

I would not recommend using the grill without the fire box heat shield installed. If it was not needed it would not have one. DO NOT USE THE GRILL WITHOUT IT.

Read More
Joey S -
Sears Technician
May 20, 2010
Q:

What is the correct part for the electrode on my grill?

A:

Per the manufacturer, the electrode and wire are part of the burner assembly. That being part number 80012232.

Read More
XX Wade_ -
Sears Technician
July 02, 2009
Q:

How do I check the electrode on my Kenmore gas grill?

A:

You will need to remove the screws #27 holding down the burner assembly in figure A. You can lift out the complete burner assembly to access the main burner igniter. The igniter/electrode spark module assembly #26 part number is 80014484.

Read More
biker dave -
Sears Technician
June 23, 2009

Top Parts