Model #4101 PORTER CABLE Laminate Trimmer

  • Underscribe Laminate Trimmer
    3 Results
Find part by diagram >

Question and Answers

Q:

I need the wiring diagram for my range to have it fixed

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
October 28, 2011
A:

I am sending you a wiring schematic for your range. Use caution when testing live voltage and disconnect power to the range when operating in tight areas.

Read More
Jimmy K -
Sears Technician
October 29, 2011
A:

I require the wiring schematic for gas range model 665.7501 4101 the broiler and oven will only light sporadically even though the igniters have 120VAC to them

Read More
gary -
March 16, 2015
A:

I require the wiring schematic for gas range model 665.7501 4101 the broiler and oven will only light sporadically even though the igniters have 120VAC to them

Read More
gary -
March 16, 2015
See more answers
Q:

Model #790.4101 Kenmore Elite Electric range Digital Control Display 790.4101 Kenmore Elite Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com

Read More
Natasha12 -
Sears Technician
December 05, 2013
A:

Have the Same problem My range is a 79041014802 which this site can't find. The tho oven seems to work fine and the display works for the oven. The range surface will turn on then I have to set it high but I can not lower the temperature setting. The Low arrow buttons on all burners do not work and the display lights show some sort of symbols not the HI or numbers. What I need to know is which board to change. Is there a way to test the boards. It looks like the range controller and/or the keyboard 316575431and/or 318918018 are bad how do I test them.

Read More
TAMMY -
October 03, 2014
A:

I have also had this issue and now when I have looked on to this site to ask my question and have found that nobody has answered yours, I am even more frustrated. When I logged onto what I believed to be the Help line, I am prompted to only two boxes 1. ask about a part already ordered or 2. ask about a part I wish to order. I don't want either one. I want to ask about how to fix something. I wonder if this is just a Kenmore or sears runaround where no answer is available unless a previous customer or repairman chimes in. Well, I'll leave my question here and see what happens. After this I intend to check out YouTube and see what I can find there. I have found many Fix it Yourself aids there.

Read More
Todd White -
November 24, 2014
See more answers
Q:

kenmore elite electric range error 14

A:

A electric range is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question. I hope the link provided is helpful. Have a great day!

Read More
Alina F. -
December 30, 2011
A:

You are probably seeing error code E014 which indicated that one of the ribbon wire connections between the control panel and the electronic clock control board in the console are disconnected or not connected properly. Since you just had the range serviced, I recommend that you try to get the service technician back out to your home to try and resolve this problem.

If you want to try one troubleshooting tactic that may fix the problem, you can shut off the house circuit breaker for the range to completely disconnect power for 3 minutes. Power the range back up and see if the error code returns. If it does, then the repairman will need to check the components in that console.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
January 03, 2012
A:

My range is 4 years old and we have had trouble with this 790 model. The error code 14 comes on when we try to turn the burners on. I will try turning it off for 3 minutes to see what happens.

Read More
robert -
November 26, 2013
See more answers