Model #39719580 CRAFTSMAN Grinder

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Attachment 39719580 Craftsman Craftsman 1/3 h.p. grinder

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the information for the attachment you have for your grinder.

 On page 4 of your Owner's manual shows how to use the buffer and polishing attachment. There are no specific instructions due to the age of the product. 
Click here for the Owner's manual.

For the stones you maybe able to locate the parts or accessories at your nearest Sears center. 

The grinding wheel is a 6" . 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
May 19, 2015
Q:

Grinder model 39719580. Question on threading of shaft. 39719580

A:

It's not safe to use that way because the wheel will tend to loosen when threaded in the reverse direction of the design.

Read More
Lyle W -
Sears Technician
December 10, 2014