Model #3971949 CRAFTSMAN Grinder

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Bench Grinder 397.1949 lamp dis-assembly

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
November 30, 2011
A:

Thank you for your question on the light switch for the work lamp.

The flexible gooseneck and the light socket and switch are all in one part.

However the part for this old grinder is no longer available.

You may have to do a home repair with a generic switch that you can find locally. Some of the electrical supply shops as well as Hardware and home centers will have generic light sockets with switches built into the socket and this may work for you.

Also places like WW.Grainger will have a lot of lighting products for tools.

I am sorry that I cannot help you with a replacement switch for this bench grinder.

Sam A.

Read More
Sam A -
Sears Technician
December 02, 2011
A:

My question is how to dis-assemble the lamp to get to the point of isolating the switch. Are you saying is is not possible to do this?

Read More
Bill -
December 02, 2011
A:

Thank you for your update. The parts list does not show the switch as a separate part so I have to assume it is put together at the factory as a complete light kit and it was not intended to be serviced with individual parts. At the time it was available you had to order the whole thing as a completer unit. You may have to break the knob to see how they attached the switch to the gooseneck. Sam A.

Read More
Sam A -
Sears Technician
December 02, 2011
See more answers