Model #3903 KENMORE Well pump

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

need part number for power cord RF28HMEDBSR/AA-0000 Samsung Refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
When viewing the model number on SearsParts, the power cord is listed on schematic 'Cabinet Assy' as number 36. The part number is 3903-000786.
For convenience, I have included a blue link below that you may click on to be directed to SearsParts to purchase the power cord for this model of refrigerator.

Power Cord for Samsung Model RF28HMEDBSR/AA-0000

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
April 19, 2014
Q:

need part number for power cord RF28HMEDBSR/AA-0000 Samsung Refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
When viewing the model number on SearsParts, the power cord is listed on schematic 'Cabinet Assy' as number 36. The part number is 3903-000786.
For convenience, I have included a blue link below that you may click on to be directed to SearsParts to purchase the power cord for this model of refrigerator.

Power Cord for Samsung Model RF28HMEDBSR/AA-0000

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
April 19, 2014
Q:

Refrigerator Samsung model rf217abwp/xaa need to replace the power cord

A:

The Refrigerator is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
September 28, 2011
A:

The part number of the power cord for your refrigerator is 3903-000400, and the cost is $29.49. You can order the cord at Parts Direct

To replace the power cord, remove the compressor compartment cover. Remove the 3 screws holding the connection box to the refrigerator.

The connector on the end of the replacement will connect where the original was. Attach the green ground wire to the same screw the other green wires are attached to.

Read More
Jimmy K -
Sears Technician
September 30, 2011
See more answers

Top Parts