Model #390251983 CRAFTSMAN Pump

  • Jet Body
    3 Results
  • Motor
    3 Results
  • Vertical Casing Adapters
    3 Results
  • Single And Double Pipe Jets
    3 Results
Find part by diagram >

Question and Answers

Q:

input power voltage 390251983 Craftsman Pump

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your pump. Upon researching model 390251983; the owner’s manual would not have this kind of information due to the safety hazard of water and electricity. I recommend contacting an electrician to make the conversion.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 14, 2015
Q:

how do i prime this pump 390251983 Craftsman Pump

A:

Thanks for the inquiry and for being a valued member.

To prime the pump you will need to fill the pump inlet pipe with water and fill the pump housing with water. Most pumps will have a plug on top of the pump housing (body) that can be removed for this purpose. To fill the inlet pipe with water, the pipe will have to have a foot valve on it. 

There is likely a port on the top of the pump housing where you can fill the pump with water to prime it. If you can get a 5 gallon bucket of water and start priming the pump as soon as power is applied. It may take a few gallons to get it primed up and going.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 24, 2014
A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you. I have found some information that should be helpfull. Ill post the picture below. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
December 24, 2014
A:
JeffwallaceIII -
Sears Technician
December 24, 2014
See more answers
Q:

Shallow well Jet pump Model#390251983

A:

Having a Owner's Manual is very important just because it has specific information upon your equipment. I was able to only pull up what you already might have. The expert perhaps will be able to get some additional information. The other thing that i would recommend is if you have an issue or problem you might want to add it to this thread. So that way the expert can answer the issue as well.

Read More
celene -
February 20, 2011
A:

The manual for your pump is currently not available online. You can order a copy (part number F642-9905) HERE if needed.

To prime the pump you will need to fill the pump inlet pipe with water and fill the pump housing with water. Most pumps will have a plug on top of the pump housing (body) that can be removed for this purpose. To fill the inlet pipe with water, the pipe will have to have a foot valve on it. If you do have a foot valve and you cannot get the pipe to fill with water it very likely a pipe has broken.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
February 22, 2011
See more answers

Top Parts