Model #38413016300 KENMORE Mechanical Sewing Machines

  • Rear Cover/front Cover F=unit
    3 Results
  • Presser Bar Base Plate Unit
    3 Results
  • Needle Bar Supporter
    3 Results
  • Upper Shaft/handle, Wheel
    3 Results
  • Handle/zig Zag Mechanism
    3 Results
  • Shuttle Race Body Unit
    3 Results
  • Feed Rock Shaft Unit
    3 Results
  • Motor/timing Belt
    3 Results
  • Accessory Set/foot Control
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


i have a singer sewing machine model # 384.13016300, i need a 1/4 " presser foot to be compatible.My machine is older and is not listed to fit this part?


An expert shall have an answer to your question shortly. Usually it takes an expert about 24 to 48 hours to respond to a question. Have a nice day.

Read More
Alina F. -
February 26, 2011

Thank you for your question.

I can understand wanting a 1/4 inch seam allowance foot for your machine.

The part number for the 1/4 seam allowance is: 743504003 and you can purchase if from: Sears Parts Direct .

There were a small number of Singers labeled machines at the time you purchased yours that were not built by Singer. Sears made a special arrangement with another manufacture to make some exclusive models with a Singer approval at the time.

Your model is basically a Sears machine made by the 385.source and most of the Low Bar, Center Needle Position, Vertical shuttle accessories with fit your machine.

If you want some more accessories please send us an inquiry and I will be more that happy to help you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
February 28, 2011
See more answers

Top Parts