Model #37601 BISSELL Vacuum, Upright

  • Vacuum
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I replace or fix my detergent dispenser?

A:

I think we all hate doing dishes by hand. I'm sorry to hear that you are having some difficulties with your Sears Dishwasher. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
James -
December 23, 2011
A:

Thank you for your question and I understand your concern.

The complete detergent dispenser assembly will need to be replaced. The dispenser assembly is part #W10224428 which can be ordered from SearsPartsDirect .

In order to access and replace the dispenser assembly will require removing the outer door panel. I added instructions in the image below.

NOTE: disconnect the power supply from the dishwasher before removing the outer door panel.

Read More
Joey S -
Sears Technician
December 23, 2011
See more answers
Q:

My hot water heater was manufactured in 2000. It once provided hot water for a family of four. Now it barely provides a shower. Does it need replacing?

A:

High utility bills is a good reason to see what appliance is the culprit. There are so many energy savings options today in regard to hot water heaters. The savings per month may pay for the cost of a new unit. While you wait for the expert answer , you may wish to check a web link I attached to help decide if it is time for a new hot water heater. If you would like to check out some different models and prices, you can view the Sears.com link to comparison shop. Hope this helps!

Read More
Barbara H. -
August 21, 2010
A:

Thanks! It is exactly what I have come to decide. For $328 at Home Depot I can get an energy efficient hot water heater. Or what I have, new, for $225. Whereas--all of the "water heater" specialists in my area require $90-$100 for a repair call! It is sad, I guess, that hot water heaters only last that long, in terms of filling up land-fills with garbage. BUT--in two months I can save what it appears this inefficient thing is costing me. Thanks!

Read More
sarahahren -
August 22, 2010
A:

When a water heater runs out of hot water sooner than it used to, it is usually caused by the dip tube being cracked or broken or the tank being coated with lime and calcium from the water.

The dip tube runs from the inlet fitting to the bottom of the tank inside the heater. This causes the incoming cold water to be at the bottom of the heater and you use most of the hot water before the cold water comes out of the heater.

When the inside of the tank coats with lime and calcium it causes the elements to not heat as efficiently and uses more electricity.

I would recommend replacing the water heater. If you go to www.sears.com you can compare features and prices of water heaters.

Read More
Jimmy K -
Sears Technician
August 23, 2010
See more answers

Top Parts