Model #3639537753 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Freezer Section
    3 Results
  • Ice Bucket
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Section
    3 Results
  • Unit Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

ice maker not working

A:

I understand how it can be disappointing when it comes to a newly installed appliance not working. I have done some research on the Manage My Life website and have located several links similar to your issue. While you are waiting for a detailed reply from an expert I have provided the links below. Hope this helps!

Read More
Priscilla V -
May 23, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the icemaker. If there is no water getting to the icemaker and a new icemaker is having the same problem, the most likely reason will be the water valve. A good check will be to reverse the wire harness connections on the water valve. First, disconnect the power and remove the back panel cover. With the cover off, you will see the water valve. Remove the screws holding the valve and you will be able to pull it out to reverse the harness connections. Now, reconnect the power and activate the dispenser. If water flows to the icemaker when the dispenser is activated, it will indicate the valve # WR57X10051 has failed and will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
May 24, 2012
See more answers
Q:

I have a kenmore refrigerator #363.9537753. & I want to know why a tech told me to replace the icemaker with part #WR30X10093. I did replace it & the icemaker

A:

It has to be frustrating to replace a part on the ice maker and it still does not work. I am providing links with similar issues on Kenmore refrigerator. Hope these help while waiting for an expert answer.

Read More
Anna T -
May 09, 2012
A:

Thank you for your question. The replacement icemaker for this refrigerator is # WR30X10093. After the icemaker is installed, it can take a few hours before it will cycle the first time. A good way to speed the initial start up is, to manually pour approx. 3 ounces of water in the mold. I'm also attaching a picture with instructions to manually cycle this icemaker. If it cycles but does not fill and if you can hear a humming sound from the back of the cabinet, it will indicate the water valve is being energized but not opening. In this case, the water valve # WR57X10051 will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
May 10, 2012
See more answers
Q:

How to install fridge reservoir (it's just long tubing?)

A:

I understand your concern toward wanting to install a tube on your refrigerator, although you are having problems installing the tube I will more than happy to help you. While you are waiting for an expert answer, I recommend you resubmit your question including the model number of your refrigerator so that the expert will provide you with a more detailed answer. I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
October 21, 2010
A:

I apologize here is the link http://www.managemylife.com/mmh/questions/209413-kenmore-refrigerator-m10657572791-replacement-reservoir-is-tubing-what-parts-and-how-to-install

Read More
Joseph P. -
October 21, 2010
A:

Thank you for the quick reply. Mod. 106 9552880 Just seems a little weird because a reservoir is no longer used, just tubing instead so am I supposed to wrap tubing around at a certain length in order for enough water supply sit in fridge to be ready and cold? In general I'm unfamiliar with this process so I do appreciate your help in finding instructions, I'll look at provided link in meantime.

Read More
Sam -
October 21, 2010
A:

I just noticed your suggestion of resubmitting a question including model number, please confirm if by me replying with model number in this string will suffice or if I should post a new question all together - thank you.

Read More
Sam -
October 21, 2010
A:

Depending on your model it may be a little tank or tubing. A lot of them are now using a coil of tubing as the reservoir. If you can reply back with your model number I will verify what type your fridge has and what it will take to put it in.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 22, 2010
A:

Hello Wade: Fridge Mod. 106 9552880 Original Fridge Reservoir - Picture attached Replacement Reservoir Part Number: 2256126 - Picture attached Thank you for your assistance.

Read More
Sam -
October 22, 2010
A:

I'm sorry it's taken me so long to get back to you on this. I am attaching a photo with the description of how to replace the water res. It looks like they changed from the tank design to the tube coil. The tube tank will work just as good (maybe even a bit better) as the original part.

Read More
XX Wade_ -
Sears Technician
October 26, 2010
A:

Wade: This is the confirmation of correct replacement part and instructions I've been waiting for so I want to thank you for that! It looks like it gets pretty involved so I hope complete this project without issues. Enjoy your day.

Read More
Sam -
October 26, 2010
A:

It's really not a super hard job, so I have no doubt that you can complete it. If you run into any problems please let me know and I will assist you. And next time I wont take 4 days to get back with you next time. I really am sorry about that. Our system sometimes doesnt let me know if someone gets back with me and I just didnt go back far enough checking. Wont happen again.

Read More
XX Wade_ -
Sears Technician
October 26, 2010
A:

I need help in removing the reservoir, part #810 in model 363-953-7753. How should the tubes be disconnected from the reservoir? There is an intake connection and an outflow connection, neither one is easily separated from the reservoir. There appear to be threads but it doesn't thread (screw). I can't pull it out either. Should I just cut the tubing? I have a replacement reservoir on the way. I want this filthy thing out.

Read More
Barbara -
December 13, 2011
See more answers

Top Parts