Model #3639527810 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Freezer Section
    3 Results
  • Ice Bucket
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Section
    3 Results
  • Unit
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator not cooling good. 3639527810 Kenmore Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.”

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

Defrost problem sit 363.9527810 refrigerator 3639527810 Kenmore Refrigerator

A:

You indicate that the defrost drain appears to be clear. Based on your symptoms, the drain tube that carries that water down to the drain pan beside the compressor is apparently clogged. I recommend that you safely store your food and then manually defrost the entire refrigerator/freezer by unplugging it. Open the refrigerator and freezer doors to allow air to circulate during this process. It should take 8 to 10 hours to completely defrost the refrigerator/freezer. Once the unit is completely defrosted, pour some hot water down that defrost drain and see if it is clear. That water should drain down to the drain pan beside the compressor. If that drain tube is clear, plug the refrigerator back in and then load your food once it reaches operating temperature.

 

If the drain tube is still clogged, then you will need to clear that clog to fix your problem. If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
November 07, 2013
Q:

How do I install the new water valve to my icemaker?

A:

The new water valve has been revised & no longer requires the plastic threaded nuts.

First unplug or disconnect power to the refrigerator.

You will need to cut the existing threaded connectors off of the plastic tubing by cutting the plastic hose flush above the nut. The end of the hose will need to be pushed into the valve openings where the old valve has the threads. Push the hose in until it bottoms out, approximately 1/2 to 1 inch. The hose ending will lock into position when correctly inserted & slightly pulled back on. Be sure to check for leaks after completion.

Read More
Electrical Bucket -
Sears Technician
May 06, 2008
A:

thanks, this helps. however, now we need a wiring diagram in order to reconnect the hoses. Any help would be appreciated.

Read More
denise -
May 27, 2012
See more answers

Top Parts