Model #3639527710 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Freezer Shelves
    3 Results
  • Ice Bucket/auger
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Shelves
    3 Results
  • Unit Parts
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I get instructions on installing the door gasket on my refrigerator?

A:

This type of repair is done as an exact replacement. No instructions are written for this. Loosen all the screws holding down the metal strips & pull the gasket out from under the lip of the metal strips. Be sure to look at the way the gasket lip goes under the metal strips & repeat that for the new gasket. If your new door gasket has been folded & creased you can place the whole gasket in a sink full of hot water to make it easier to install. After installing, you can use a hair dryer to gently warm up the gasket to get it to seat correctly. After completion, leave the door closed for 8-10 hours. Be sure to clean the surface around the cabinet where the gasket meets the metal. You can also use a small amount Vaseline to lightly coat the hinge side of the door gasket surface.

Read More
biker dave -
Sears Technician
August 13, 2008

Top Parts