Model #36378852892 KENMORE Top-Mount Refrigerator

  • Freezer Door
    3 Results
  • Fresh Food Door
    3 Results
  • Cabinet Parts
    3 Results
  • Shelf Parts
    3 Results
  • Compartment Separator Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Wr30x0327
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

replace seal kenore refrigerator

A:

Replacing gaskets can be challenging. The correct instructions often depend on the model number of the refrigerator, so if you can add that to this thread it will help the expert provide a better answer. In the meantime, I found and attached some good instructions that may get you started. If you need to order a seal, just click on the link below to Sears Parts Direct and enter the model. Hope these links help with this project.

Read More
Barbara H. -
January 23, 2011
A:

Barbara H. provided a link for a previous answer that describes how to replace the seal on one type of Kenmore refrigerator. There are many different types of Kenmore refrigerators. Some of the seals will just press into a channel after pulling off the old door seal. Some of the french door refrigerators will use the procedure shown below. If you have a different type of Kenmore refrigerator, reply with the full model number and we will assist you further.

The model number is often on the top of the inside right wall of the refrigerator compartment.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 24, 2011
A:

Kenmore # 79578552800 it's the top right french door

Read More
Ray -
February 18, 2013
A:

We were told by someone that there were sept by step instructions, HOW do I ger them?

Read More
Ray -
February 18, 2013
A:

we need information about replacing the right door seal on our Kenmore refrigerator model # 79578552800

Read More
Ray -
February 18, 2013
A:

Hello Ray. I posted an image below that shows a basic procedure for removing and replacing the door gasket on that type of refrigerator. If you are on the Sears PartsDirect website and cannot view the image, click on this link to visit the Manage My Life.com website and view that image in this response: replace seal kenore refrigerator . If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
February 20, 2013
A:

Hello, i have a top freezer model number 363.78852892. could i get instructions on replacing the fridge door seal please? thank you.

Read More
doug -
June 13, 2013
A:

Hello Doug. I posted a parts diagram of the refrigerator door in the image below. Replacing the gasket on that door will be a challenging. You will need to remove the screws that secure the inner door liner Key 103 to the outer door panel Key 910 to remove the existing gasket. There will also be retainers (Key 24) on the gasket. You can use a heat gun or hair dryer on a low heat setting to smooth out any wrinkles in the new gasket. Attach the retainers and position the new gasket in place. Insert a few screws to hold the new gasket and the inner door liner in place. Do not tighten the screws all of the way at this time. Insert all of the screws loosely in the door. Adjust or "rack" the door so that it is "square" and then tighten the screws. Make sure that the door seals properly. This can be a difficult task since you may not be used to completing this type of procedure. You may need to have a service technician replace that gasket. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
June 14, 2013
See more answers

Top Parts