Model #36358895890 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Shelves
    3 Results
  • Freezer Section
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Section
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Wr30x0328
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do you reset icemaker

A:

Thanks in advance!

Read More
TLR -
March 23, 2012
A:

Icemakers are a great convenience. When the stopped working it can be a hassle. I did find some information for you. I am adding the links below to help you with your question while you wait for your expert response. I hope that this will help you with the icemaker.

Read More
Marc H -
March 23, 2012
A:

I know that it can be very frustrating to have issues with your refrigerator ice maker. However, normally there is no way to reset it. If you are having an issue with the ice maker, it is most likely that parts or the ice maker itself will need to be replaced. If you could reply with more detail on the issue, I can then provide a more detailed answer. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 24, 2012
See more answers
Q:

Kenmore Side By Side Refrigerator model # 363.58895890

A:

The Refrigerator is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
December 11, 2011
A:

Don't worry, we unplugged it. Vacuumed the vent at the bottom, it seems to be working now...

Read More
TLR -
December 12, 2011
A:

When you see water in front of the refrigerator, remove the grill below the doors and look under the refrigerator with a flashlight to see where the water is coming from. If you can locate the source of the water, you can probably stop it.

The icemaker or the water valve might be why the icemaker doesn't make ice. If the ice mold is empty, fill it with a syringe or squeeze bottle and see if it dumps the ice. If the icemaker does not dump the ice, replace the icemaker.

Look in the back of the freezer and see if the rear wall has frost and ice on it. If there is frost on the rear wall, the defrost system is probably not working. If this is the problem and you want to troubleshoot the defrost system reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
December 13, 2011
A:

Hello Jimmy K, glad you answered this post because regrettably I'm having the same problem again now with lack of cooling. I don't see frost on the rear wall, but I'm going to try to troubleshoot the defrost system because that seemed to work last week, I'll check out the video and do a more through job to see if that will work- I really don't want this food to go bad....Thank you.

Read More
TLR -
December 17, 2011
A:

Reply on this thread if I can help.

Read More
Jimmy K -
Sears Technician
December 17, 2011
A:

It's definitely not the defrost system. The whole thing is just cool but not the icy cold it needs to be...

Read More
TLR -
December 18, 2011
A:

My fridge seems to be working now. I opened the back where the compressor is located and vacuumed and cleaned as much as I thought would be safe. This seems to have worked, so it's cooling more now. However, now my concern is outside, around the fridge and freezer doors are hot. I'm not sure if this is normal because the fridge is perhaps in overdrive trying to cool down now or what? Thanks!

Read More
TLR -
December 18, 2011
A:

TLR, remove the rear cover on the compressor compartment again. Disconnect the power to the refrigerator while you are removing the cover. Check the small fan beside the compressor. I suspect the fan is not running or the fan blade is broken. When this fan has a problem, the area around and between the doors will get hot. I hope you find the problem.

Read More
Jimmy K -
Sears Technician
December 19, 2011
A:

Thanks Jimmy K. Seems to be working

Read More
TLR -
December 23, 2011
See more answers

Top Parts