Model #36358067891 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Ice Bucket
    3 Results
  • Freezer Section
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Section
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Wr30x0327
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore model 363.5806789

A:

It's an inconvenience for the refrigerator not to be cooling properly. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day!

Read More
Yadira B -
October 15, 2012
A:

Thank you for your question. I know it can be frustrating when the refrigerator and freezer stop cooling. If the freezer temperature will not pull down below 10 degrees and the compressor is always running, it will lead to a sealed system problem. A technician will be required to make this type of check and repair. If the compressor is cycling off, check to see if the condenser fan next to the compressor is running. If the motor stops running, it will cause the compressor to overheat and also stop running. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
October 16, 2012
See more answers
Q:

How do you make icemaker WR0X10093 (Sears recommended replacement) fit in refrigerator model 363.58067891?

A:

I understand the frustration when it comes to working on installing parts on you refrigerator properly. While you are waiting for a detailed reply from an expert and you do decide to have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler. I have provided the link below. Hope this is of help!

Read More
Priscilla V -
June 13, 2012
A:

Dear Stephen,

First of all, I apologize that we weren't able to answer your question last month. We strive to answer all of our questions within two business days. I looked and wasn't able to find your previous question. If you have the URL of that question I can answer it and investigate why you didn't get your answer. In any case, I am happy to help you now.

The icemaker itself is a generic replacement for several models , but I have researched your model, and this part number should definitely fit. I reviewed past service orders where our field technicians have successfully installed this icemaker into your specific model, so I'm pretty sure you have the right part. It just might be tricky getting it to fit. So the fact that the power cord looks different should not be cause for alarm. Also, the longer adapter cord is needed in some models, but maybe not yours. It is just an extension, so try removing the extendable piece, and that may give you the room you need.

Since one picture is worth a thousand words, would you be kind enough to take a picture of your unit, where you are installing the icemaker, and any other detailed pictures that show the obstruction. You can do that by clicking the "Add an image" link in your reply. This is a reasonably hard repair to make, and it's even harder because the new part looks different than the old so you can't just reverse your steps. But we are happy to help you. Please try this suggestion and send me a picture if you are still having problems.

If you choose to get a Sears installer to help you with this, you certainly can schedule service with Sears Home Services . , but if you want to save some money and do it yourself, I will help you.

Read More
Bill__W -
Sears Technician
June 19, 2012
A:

Bill, the icemaker won't fit. I need the extended adapter cord to make the male-female transition but with it in place the icemaker won't fit. The cord gets in the way. I can install it without the adapter cord but when I do the ice bucket with the dispenser auger absolutely can't be put back in place because the new icemaker hangs lower than the original and obstructs the point of entrance. The only solutions possible would be to remove the old power cord from the defective unit and install it on the new and then buy a replacement ice bucket. I'm not confident that replacement would be any better than the replacement for the icemaker. I'll send pictures soon. Steve

Read More
Stephen -
June 19, 2012
See more answers
Q:

Kenmore363.58067891 My ice maker isn't getting water.

A:

Hello, a refrigerator is a very important appliance in a household. Having the water dispenser and ice dispenser work is great and handy and it not working or leaking water can be frustrating. What I usually do when I need some troubleshooting information is go onto the Sears Home Services website. It is full of helpful tips and very good troubleshooting information. A suggestion that I have for you is while waiting for your experts response is visiting the site and troubleshoot your appliance. I have provided the link below for you if you are interested in visiting the website. I hope this helps!

Read More
Alina F. -
July 04, 2010
A:

This could be a problem with either the icemaker or the water valve. One method of checking this will be, to cycle the icemaker manually. To cycle this icemaker, pull the front cover off and rotate the small gear counterclockwise and the icemaker should start into a cycle. Towards the end of the cycle, it will initiate the water fill. If it does fill, the icemaker # WR30X10093 will need to be replaced. If it doesn't fill but you hear a humming noise, the water valve # WR57X10012 will need to be replaced. If the icemaker won't cycle or if you don't hear anything at the end of the cycle, some voltage checks will need to be made. A technician may be needed to make these checks. If you need more assistance, additional details will be needed.

Read More
Scott D -
Sears Technician
July 08, 2010
See more answers

Top Parts