Model #36357552791 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Freezer Section
    3 Results
  • Ice Bucket
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Section
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Wr30x0320
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Icemaker issues 36357552791 Kenmore Side by side

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your refrigerator. Upon researching model 36357552791; there isn’t an adjustment for the paddles. There is a motor that controls the entire icemaker. Once the motor gets to a certain point the paddles turn. The motor turns a cam that connects to the paddles. The cam is number 15. Click here for diagram.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
January 07, 2015
Q:

water filter 36357552791 Kenmore Side by side

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Dezeray S -
June 05, 2013
A:

I know that it can be very frustrating to have issues with your ice maker. There is no water filter on this model, so this is not causing the problem with the ice maker. If the ice maker is not filling, it's usually due to a failed water valve or the ice maker itself. It's possible the freezer temperature may not be getting cold enough to cycle the ice maker. If the temperature gets above 10 degrees, the ice maker will quit making ice. The best way to check the temperature is to place a thermometer between some packages. Air temperature is not a good check. You can also try to manually cycle the ice maker to see if it is working. To cycle this icemaker, pull the front cover off and you will see a large and small gear. Turn the small gear counterclockwise about a 1/4 turn and the icemaker should start into a cycle. I'm attaching a picture with instructions. Towards the end of the cycle, it will or should fill with water. If it does not fill but you can hear a humming sound, it indicates the valve is getting energized. In this case, the valve will need to be replaced. If it does fill with water, the icemaker will need to be replaced. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
June 05, 2013
See more answers
Q:

Why won't the ice bin fit with this new icemaker?

A:

I'm sorry you're having this type of problem. The replacement icemaker for this model is # WR30X10093 and if that is what you have, the bin should fit back in place. There have been no problems with the bin not fitting back in place. Maybe this icemaker is too low or maybe the wire harness is interfering with the bin. A technician may need to check this and also determine, if this is the correct icemaker you received. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
July 09, 2009

Top Parts