Model #3631479581 KENMORE Dishwasher

  • Cabinet And Door
    3 Results
  • Escutheon And Motor/pump
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

replacement 3631479581 Kenmore Dishwasher

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 
We don't really get into retail a whole lot for replacement models, we mainly provide technical support and troubleshooting for identifying issues with the products.
In regards to finding a suitable replacement dishwasher, I would recommend visiting Sears.com to look at some of the new units to see what you like. Retail associates in the stores are also knowledgeable about the various features and benefits. Making a trip to the store when ready to purchase will be helpful in seeing the units first-hand and seeing which offers the features you are looking for. 
Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 12, 2014
Q:

on the Kenmore dishwasher model #363.1479581 does the gasket that goes around the door have a connector to prevent leakage?

A:

Each part to an appliance does have it own special reason for being connected were it is. While you are waiting for your expert answer, I did some research on your model. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
December 27, 2012
A:

I understand how disappointing it is to have a continued leak after repairs. Make sure the gasket fits snugly and the ends are tucked in. There are two corner tub baffles located in each front corners of the tub. If one or both are missing or damaged, it will leak. If the baffles do need to be replaced, make sure the corners of the tub are clean of any undissolved detergent, grease etc before pushing the corner baffles in place. The part numbers are #WD8X227 and #WD8X228. They can be ordered here; Sears Parts Direct .

If further assistance is needed, please reply. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
December 28, 2012
See more answers
Q:

Dish washer will not drain.

A:

A dishwasher is a appliance we tend to use a lot, when it starts malfunctioning it can be a big inconvenience. To help you while you wait for a experts response i have attached a link below to manage my life where a expert answered a similar that can be very useful for you. Hope it helps!

Read More
Maira E -
October 20, 2010
A:

If your dishwasher will not drain any water at all then the most likely failure based on your symptom and details is a failed drain solenoid.

I added a link below with an answer from a previous question that should help you diagnose the failure.

Why is my Kenmore model 363.15324100 dishwasher not draining at all?

Read More
Joey S -
Sears Technician
October 22, 2010
See more answers