Model #3631444195 KENMORE Dishwasher

  • Dishwasher Door
    3 Results
  • Dishwasher Tub (363.1444195)
    3 Results
  • Motor Pump Mechanism(363.1444195)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore dishwasher 363.1444195 is leaking water from the bottom, after looking at it is coming from the solinod valve area ,could it be part 493 SOLINOID VALVE

A:

The water would not be leaking because of a bad drain solenoid valve. The solenoid is nothing more than an electromagnet used to pull the drain flapper open. The water is likely leaking past the rod going into the pump housing which actuates the drain flapper or it is leaking past the pump seal. If the pump is leaking water, the pump should be replaced. The pump assembly is part #WD26X10013 at $156.49. You can order and have the pump shipped to you from Sear Parts Direct .

Read More
Joey S -
Sears Technician
May 04, 2010
A:

i'm having the same problem. i'm thinking of replacing with part #WD21X10060 since it's the only package that contains the flapper. could it be possible that he screw just needs to be tightened a little (before i spend the money)? kenmore 363.15479000

Read More
Benjamin -
August 08, 2012
A:

i just realized that by "flapper", you were probably referring to an internal part. just for clarification, my leak is coming from behind the white plastic piece connected to the solenoid arm.

Read More
Benjamin -
August 08, 2012
See more answers