Model #36314074791 KENMORE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What is the price (with labor) to replace a Solenoid on a Kenmore dishwasher model 363.14074791?

A:

To provide an exact estimate, a technician would need to visit your home. A rough estimate for this repair would be about $200. The part would likely cost about $50 and the labor would be about $150.

Read More
Lyle W -
Sears Technician
July 29, 2009
Q:

Why won't my Kenmore dishwasher fill with water properly?

A:

Make sure that the water supply cut-off valve is opened properly. Lack of water supply due to a shut valve or a water line clog could prevent the dishwasher from filling.

There is a float switch in the left front bottom of the dishwasher tub (Key 305 in the image below). Make sure that this float is not stuck in the "up" position. This would prevent the dishwasher from filling.

You could have a failed inlet water solenoid valve, a wiring failure or a bad timer that could also prevent the dishwasher from filling. A technician is normally needed to diagnose and repair this type of failure.

If the dishwasher will not start (as opposed to not filling), then you could have an electrical supply problem or a door switch failure.

If you need more help with this dishwasher problem, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
August 05, 2008

Top Parts