Model #36275671691 KENMORE Free Standing, Gas

  • Gas Burner
    3 Results
  • Control Panel And Cooktop
    3 Results
  • Body
    3 Results
  • Door And Drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

The oven and broiler does not light. Plus the self-cleaning does not work. 36275671691 Kenmore Gas range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
August 04, 2013
A:

Thank you for using ManageMyLife.com. I am sorry to hear of the issues you are experiencing with the oven cavity and the self-clean feature, I know how frustrating that can be.

Based upon the symptoms you are describing, and presuming the surface burners all work correctly, I am suspecting you are having an issue with the electronic control board. It sounds as if there is a communication error between the board and the oven cavity. The self-clean feature would also fall within that error.

I have pulled up the parts list for this unit, and the original electronic control board for this model has since been discontinued. There is a substitution board available, however, a Sears Home Service Technician must order and install the new board to go that route. If you do decide to have a technician order and install the board, I would also recommend replacing the overlay (push buttons) on the control panel. There are three different color options, so knowing your color code is critical.

For convenience purposes, I have included a blue link below you may click on to be directed to the PartsDirect page to view the schematic for the board and overlay. The board is number 129, and the overlay is 128A (White), 128B (Almond), and 128 (Black).

Control Panel Parts for Model 36275671691

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Jeff Wallace Sr -
Sears Technician
August 05, 2013
See more answers
Q:

Kenmore range convert from NG to LP

A:

I understand that you want to convert your natural gas range to an LP range. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
June 29, 2012
A:

A little more info: This is an older, lightly used, range (#75671691). I had already flipped over the gas regulator part to switch it to LP. I also live at 7,700 feet. I had read the articles suggested by Alina already. Thanks.

Read More
Jim -
June 29, 2012
A:

Thank you for your question and I understand your concern.

You did not mention converting the pressure regulator for LP gas or adjusting the air shutters/orifice hoods for the bake and broil burners. I added an image below with the procedure of converting the oven burners and gas regulator to LP gas.

This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
July 02, 2012
See more answers
Q:

Kenmore oven problem

A:

Older ovens like older anything begin to display problems as they age. While you wait for the expert to respond you can check a similar question from a previous post in the first link. I also attached the schematics and parts list at Sears Parts Direct if needed. Hope this old friend lasts a few years longer but if you would like to comparison shop I also added the link to Sears.com in the third link.

Read More
Barbara H. -
July 15, 2011
A:

Thank you for your question.

I can understand wanting the oven to get to temperature in the regular time.

It certainly sounds like the oven igniter is failing.

It is not much more work to change the oven vs the broil igniter.

You will need to remove the oven racks from the oven and then locate and remove the two back screws that secure the oven bottom to the range.

Lift the back of the panel up and to the back to dislodge from the front edge of the oven cavity.

You will then need to remove the flame spreader. With that removed it will be the same process as before when you changed the broil igniter.

The broil igniter is the same part so if you want to change out the broil for the bake you can test to make sure the igniter is bad.

Since you said the burner goes out even though the igniter appears to stay on it still will be the igniter. It is weak and not allowing enough voltage to hold the gas valve open.

The part number for the igniter is: WB13K21 for about $82.00. and you can order it from: Sears Parts Direct .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 18, 2011
See more answers