Model #36275671690 KENMORE Free Standing, Gas

  • Burner Section
    3 Results
  • Control Panel And Cooktop
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers


nead to convert my gass range fron nat gass too lp


Detailed instructions can really come in handy when doing some major repairs. I did some research and I was able to find a link with a similar question. I hope this helps with your range project while you wait for your expert response.

Read More
Joseph P. -
October 29, 2012

I did not find the exact LP conversion instructions for your range. The instructions should have been in the same location that you found the LP orifices. If you can find those instructions, then the installer can use those to properly convert this range to LP. Note: The LP conversion should be completed by a qualified installer.

In addition to changing the orifices on the surface burners, the regulator will normally need to be converted to LP gas. The oven burners will also need to be converted. I provided the typical procedures for those processes in the image below. If you cannot find the exact instructions for your range, then the installer should be able to use those instructions to complete the LP conversion.

You can contact your local gas supplier for a qualified installer. You may also be able to find a pre-screened service provider on the website.

If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
October 31, 2012
See more answers