Model #36275571691 KENMORE Free Standing, Gas

  • Gas And Burner
    3 Results
  • Control Panel And Cooktop
    3 Results
  • Body
    3 Results
  • Door And Drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

F3 code meaning 36275571691 Kenmore Gas range

Q:

No gas flow to oven or broiler 36275571691 Kenmore Gas range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Oven is not heating. If I ignite it it will not hold the flame. What readings should I be getting from a meter to test the igniter and erc?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
November 08, 2011
A:

I provided technical information for this range in the images below. The first image shows a wiring schematic with the bake burner ignition circuit traced in yellow and blue. The second image shows a more detailed wiring diagram that shows actual wire harness connections. The third image shows a theory of operation for the ignition system on this range. It also shows to how to access the igniter. You probably already know how to access that igniter but I supplied that information just in case you need it. I recommend that you check to see if that igniter is glowing when the oven is set in the bake mode. If the igniter is glowing, then you can check the amp draw through the wire between the igniter and the safety gas valve. NOTE: Use extreme caution when conducting this amp draw test. Wear proper safety equipment (safety goggles and insulated rubber electrical safety gloves). Do not make contact with live wires or components when conducting this test. If amp draw is not above 2.5 amps, then the igniter will need to be replaced. If the igniter is not glowing, then you could have a bad igniter, a failed control board, a wiring failure in the circuit or an "open" safety gas valve. You can unplug the range and access the control board in the console using the information in the fourth image if necessary.

If you determine the cause of your failure, you can order parts from the Sears PartsDirect if components need to be replaced.

NOTE: I do not recommend that you conduct any live voltage checks unless you are completely confident in your technical ability to safely execute them. Follow electrical safety standards when conducting live voltage checks. Wear proper safety equipment (insulated rubber electrical safety gloves and safety goggles). If you are not comfortable with making the live voltage checks or checking the amp draw through that ignition circuit, I recommend that you have a service technician diagnose and repair this failure. Here is a link for the Sears Service website in case you need it: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 09, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
November 09, 2011
See more answers