Model #3627556191 KENMORE Free Standing, Gas

  • Gas/burner
    3 Results
  • Control Panel/cooktop
    3 Results
  • Body
    3 Results
  • Door/drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

LP gas conversion 3627556191 Kenmore Gas range

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.


 
ORIFICE SPUD (LP) .56LMM- WB28K0144  
ORIFICE SPUD (LP) .78LMM- WB28K0145 
ORIFICE SPUD (LP) .90 LMM- WB28K0146  

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 21, 2015
Q:

need part numbers to convert to nat. gas by professional 3627556191 Kenmore Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is parts needed for the gas range.
 
Glad to help out.   Im  looking at your Kenmore gas range model number 3627556191.

These are the 4 "natural gas" spuds to bring it back to natural gas.

1->Natural gas spud for model 
3627556191

2->Natural gas spuds for model 3627556191

1->Natural gas spud for model 362.7556191


Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
April 09, 2014
Q:

spark ignition switch 3627556191 Kenmore Gas range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Dezeray S -
July 03, 2013
A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to have a properly working range. From what symptoms you've described, it does sound like the spark module has to be replaced. I have included instructions below on how to replace the spark module.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Spark Module for Kenmore Gas Range Model # 3627556191

1. Unplug your unit and turn off the gas supply at the saddle valve near the unit.

2. Lift up the hood of the oven. If you have sealed burners, the lid will not lift up. Locate the ignitors near the burners of the unit. Clean any gunk away from the ignitor using a toothbrush. Test the unit.

3. Pull the burner dials off the front of the unit if the ignitors won't work.

4. Remove the screws at the ends of the front cover, where the gas supply knobs are located, using a screwdriver, and remove the cover from the oven.

5. Slide the wires off the burner valve switches and pull them off the burner valve by sliding the switch forward. The switch will have wires attached to it. Loosen the screws holding down the wires of the burner valve. Pull out the wires carefully. Place the wires in a new switch. Slide the new switch onto the burner valve. Replace the knob, and turn on the gas supply and power. Ignite the burner.

6. Follow the switch wires into the oven if the new switch doesn't work. Locate the module box, which is usually 2 inches by 3 inches. Slide the wires out of the module terminal by pulling on the wire connectors. Remove the screws from the old module and pull the module out. Insert the wires into the new module, using the same wire orientation as before. Reassemble the oven. Turn on the electricity and gas, and turn on the burner.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Desirea -
Sears Technician
July 03, 2013
See more answers