Model #3627535890 KENMORE Free Standing, Gas

  • Burner Section
    3 Results
  • Main Top Section
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

How to change gas igniter

A:

I am sorry that you are having some difficulties with your appliance. I suggest you add to the thread of this question and include the full model number of your appliance so that the expert can provide you with a more detailed answer. I am adding a link below to help you locate the model number. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 23, 2013
A:

Oh, sorry... since I had came down the path from my model number I assumed it was included. It is a Kenmore 3627535890 Thanks

Read More
James -
January 23, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. To access the broiler igniter follow these instructions:

  1. Disconnect all power to the range before performing any repairs and shut the gas off.
  2. Open the oven door and remove the racks
  3. You will see the igniter mounted on the side of the burner assembly towards the back at the top.
  4. Remove the mounting screw from the igniter.
  5. Disconnect the wiring to the igniter.
  6. Install the new igniter.
  7. Reverse the procedure to reassemble the range.

This video should also help you with this repair. NOTE : Be careful with the igniter. Do not touch the dark part of the igniter and handle it will care. The igniter is very fragile and can break very easily. I hope this information helps. Please reply back to this thread if you require further assistance with this repair. If you do not feel comfortable performing test or repairing this problem yourself, I recommend scheduling for service. You can schedule for service online with our Sears Home Services team. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
January 24, 2013
See more answers
Q:

How to replace oven igniter?

A:

It is great that you have decided to take this task on by yourself. I have taken some time to research your question here on the Manage My Life website and I was able to locate a similar question to yours. I attached the link below for you to view while you are waiting on your response from an expert. I hope the link that I provided gets you one step closer to replacing your oven ignitor. Have a great day.

Read More
Alina F. -
July 28, 2011
A:

Thank you for your question on changing out the oven igniter.

First REMOVE POWER TO THE RANGE.

Open the open door and remove the oven racks.

Locate the two screws at the back bottom of the oven cavity floor.

Loosen these screws and lift the bottom panel from the back and after to the oven bottom up about 30 degrees slide it back to release from the front lip of the oven liner.

Remove the screws that secure the flame spreader above the burner.

Once you get the flame spreader removed you will be able to gain access to the igniter mount on the bake burner.

Locate and remove the two screws that secure the igniter to the burner and careful pull the wire harness from through the back wall of the chassis until you have remove the wire connections for the igniter.

Disconnect the wire harness and remove the new igniter from the shipping box and be very careful not to bump or drop the new igniter so as to not damage the delicate part.

Connect the wire harness and mount the igniter to the burner tube and re-assemble range.

The part number for the igniter is: WB2X9154 for about $76.00 and you can order it from: Sears Parts Direct .

I hope this information will help your goal of replacing the igniter.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 30, 2011
See more answers
Q:

Kenmore Gas Range #3627535890: 15 year old range, I was advised that we could reference #36275320102 for parts. This is what I want to achieve:

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
June 23, 2011
A:

I don't recommend that you attempt to alter your Kenmore gas range model 362.7535890 in that manner. I don't think that those parts will fit that older range. The model 3627535890 was not intended to have a drawer under the oven. I understand your intentions but I don't recommend that you attempt this project.

Read More
Lyle W -
Sears Technician
June 25, 2011
See more answers