Model #3627352192 KENMORE Free Standing, Gas

  • Burner Section
    3 Results
  • Main Top Section
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

right front burner doesnt engage auto ignitors 362.7352192 , 362.7352892

Q:

Converting from LP to Natural Gas 3627352192 Kenmore Gas range

Q:

Why do the surface burners and broiler light but not the oven burner on my Kenmore gas range?

A:

I provided technical information from the tech sheet in the image below. Since the indicator light glows, the circuit is good through the thermostat. I recommend that you remove the bottom panel of the oven and the burner baffle. See if the igniter is glowing in the bake mode. If it is, then the igniter will likely need to replaced since the gas valve is likely good and the circuit is complete.

If the igniter is not glowing, you could have an open gas valve or a problem with the selector switch.

You can order parts from the Sears PartsDirect website. The part number for the igniter is WB2X9154.

Read More
Lyle W -
Sears Technician
September 11, 2009
A:

Followed your instructions and the igniter does not glow as it does when the selector switch is on Broil. ???? Is this the selector switch or the igniter?? thanks

Read More
Rich -
May 30, 2011
A:

I seem to have the same problem. Burners and broil selection work fine, but bake is not. This has happened intermittently over the past year, but this time won't resolve. Sometimes I notice that the indicator light (that oven is heating) is on and sometimes it is not. I removed the bottom panel as described above and DO NOT see a glow. How should I proceed from here? Would love to be able to fix the appliance myself.... Thank You Kelli R.

Read More
Kelli -
November 25, 2013
See more answers