Model #3627326191 KENMORE Range (gas)

  • Burner Section
    3 Results
  • Main Top Section
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Converting Kenmore Gas Range Model #362.7326191 to LP.

A:

I'm sorry to hear that you are having some difficulties with your range, when working on a project like this its great to get detailed instructions. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assistance for you.

Read More
Joseph P. -
November 21, 2011
A:

NOTE: This LP conversion should be completed by a qualified installer.

The parts that you will need to complete this conversion are the 4 orifice spuds (part WB28K10376) for the stove top burners. Those spuds are shown in the image below. You can order those components from the Sears PartsDirect website. You will need 4 of those spuds. Here is a direct link for that part: Orifice Spud .

The instructions for converting this range to LP gas are provided in the owner's manual for this range. Here is a direct link for that manual: Owner's Manual . The LP conversion instructions begin on page 43. Your range has the Standard Twin burners that are shown on page 45 (not the sealed burners for the cook top that are shown on page 44). Make sure that the installer properly follows the correct instructions (also shown in the image below) for converting the cook top burners. The oven burners will not need parts to be converted. Make sure that the installer properly converts the regulator. The range shut of unplugged (and the gas supply shut off of course) when this conversion is being completed.

This information should help you with the LP conversion. If you need more assistance, let us know.

NOTE: You can contact your local gas supplier for a qualified installer if necessary. You may also be able to find a pre-screened service provider on the ServiceLive.com website.

Read More
Lyle W -
Sears Technician
November 23, 2011
See more answers