Model #36272429200 KENMORE Free Standing, Gas

  • Gas & Burner Parts
    3 Results
  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

drip pan 36272429200 Kenmore Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when looking for parts on your gas range.

Glad to help out.   Im  looking at your Kenmore model number 362.7249200.
 
 
Im sorry to say but there was no drain pans for the original model or do I see any on the research so do appologize that we can't get them.
 
 If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
November 25, 2013
Q:

Kenmore Range model 362.72429200

A:

I can understand how important it is to have your applinaces working. While you are waiting for you expert answer, I have found a link that will provide some infromation on this issue. I would suggest that you test the igniter with a volt meter to make sure you are getting 120 volts. I hope that this link will help

Read More
aashe -
May 16, 2011
A:

Since the glow bar igniter is heating, this indicates that the thermostat is good and the safety gas valve is probably okay. The theory of operation for that type of ignition system is shown in the image below. Based on your symptoms, you probably have a failed igniter that is causing this problem even though it does glow. A technician will normally check the amp draw through that circuit using a clamp-on ammeter. If that circuit is not drawing at least 3.2 amps, the igniter will need to be replaced. (If you don't have a clamp-on ammeter, you will probably be able to fix the oven by replacing that igniter anyway based on your symptoms.)

The part number for the igniter is WB13K21. You can order that part from the Sears PartsDirect website.

You should be able to access that igniter with the bottom oven panel and the flame spreader removed. Be sure that you unplug the range before accessing internal components to replace that igniter.

I hope that this information helps. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 17, 2011
See more answers

Top Parts