Model #36272295790 KENMORE Free Standing, Gas

  • Gas & Burner Parts
    3 Results
  • Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Gas oven roaring when it gets too hot?

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
November 03, 2011
A:

Thanks for contacting ManageMyLife.com. I am sorry you are having a problem with your oven. The likely cause of your bake burner to make all the noise is a weak bake igniter. It is likely causing the gas valve to slowly open and close causing delayed burner ignition. I recommend replacing the bake ignitor and will likely operate normally unless the failure the gas valve or the bake burner. I recommend calling a service technician to diagnose and repair your range. I do not recommend using the range until the problem as be repaired. See image below for instructions if needed.

You can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

I hope this helps.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
November 03, 2011
See more answers
Q:

Kenmore Oven 362.72295790,

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
July 24, 2011
A:

Thank you for your question.

I am sorry that your oven is not working on your range.

Thank you for the model number of the range.

Since the oven stopped working while it was on, does the oven light still work when you open the oven door?

If it does we know we have power going to the range.

If it is not working I would suggest checking the circuit for the oven to make sure we have power.

If all this check ok then it sounds like that your oven bake igniter has failed.

It is a high possibility that this is the problem as to why your oven is not working.

Because this is an electric ignition system with an electric valve all components in the burner circuit have to be working for the oven to light.

You would only be able to light the top burners of a cook top with a match if the power has failed.

I would suggest replacing the oven igniter.

If you would like to replace this yourself and need some help please reply and I will be happy to help you.

The part number for the bake igniter if you choose to replace it is: WB13K21 for about $82.00 plus shipping and tax and you can purchase it from: Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 26, 2011
A:

Good Evening Sam, I've ordered an ignitor. Thanks,

Read More
ehimmel -
July 26, 2011
See more answers
Q:

Why won't my oven turn on at all?

A:

You did not indicate if the glow bar igniter is glowing red or not. Open the broiler drawer and set the oven to bake or broil and watch to see if the oven igniter will glow red. If the oven ignitor is not glowing red, it could have a failed ignitor, gas safety valve or thermostat.

I added an image below showing the ignitor circuit and the theory of operation. If you find the ignitor glowing red and the safety valve never opens, the oven ignitor is likely weak and will need to be replaced. If the ignitor is not glowing, the voltage supply to the ignitor will need to be tested. If voltage is present, replace the ignitor. If no voltage is present, the thermostat and oven safety valve will need to be tested using an ohm meter. Disconnect the power cord from the power source, and test the gas safety valve and thermostat for continuity. You will need to remove one wire from the component being tested when checking continuity.

Read More
Joey S -
Sears Technician
July 10, 2009