Model #3627182190 KENMORE Range (gas)

  • Burner Section
    3 Results
  • Main Top Section
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore 362.7182190 gas oven range. How do I get to my thermostat?

A:

I know how discouraging it could be to replace a part. Especially if your unable to access the correct information to do so. I was able to find some great links that will provide you with information to replace the thermostat for a Kenmore gas range 362. I attached the links below. I hope this helps.

Read More
Jackie S -
March 30, 2012
A:

Thank you for your question and I understand your concern.

I added an image below with the procedure for accessing and replacing the oven thermostat. The sealed burners will have to be taken off before the top can be hinged opened.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
March 30, 2012
A:

So I finally completed my project. It went fairly smooth. but, it didn't fix the problem. My temp is still up and down. mostly after cooking for 30-40 mins the temp goes way down to 200-250 for a long while then eventually comes back up. What would be causing this issue, if not the thermostat??

Read More
Sam -
April 22, 2012
A:

Sam: If the bake igniter is weak it causes the oven valve to take a long time to open and let gas flow to the bake burner. Based on your symptom, replace the bake igniter located under the floor of the oven. Watch the glow bar operation. It must glow bright red and it must pull enough current/amperage to allow the oven gas valve to open. If it takes a long time for the burner to ignite, replace the bake igniter.

Read More
Joey S -
Sears Technician
April 23, 2012
See more answers