Model #36261121890 KENMORE Free Standing, Gas

  • Gas & Burner Parts
    3 Results
  • Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

switch burner valve on kenmore #362.61121890 36261121890 Kenmore Gas range

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your new part will not work with your unit. I would need to know the part number to see if it is the correct part for your model number. Once I double check then I can get you information.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 08, 2014
A:

part# WB24K10002 I will send you picture tomorrow from work

Read More
Jose -
May 08, 2014
A:

part# WB24K10002 I will send you picture tomorrow from work

Read More
Jose -
May 08, 2014
A:

part# WB24K10002 I will send you picture tomorrow from work

Read More
Jose -
May 08, 2014
A:

Okay it does go to your model and was not substitued. Please give us a couple days to find the infromation for you. 

Read More
Natasha12 -
Sears Technician
May 09, 2014
A:

Thank you for your question and I understand your concern.

Depending on where you cut the wires off from the old switch, the existing wires may not be long enough to reach the wires on the new switch. If this is the case, you will need to splice and connect a set of wires to the wires on the new switch. You will need to purchase and use  "ceramic" wire nuts to connect the wires together. Be sure to match red to red and black to black. Do not use plastic wire nuts because the heat from the oven and burners can cause the plastic wire nuts to melt and then the wires could short to ground.

NOTE: Be sure to disconnect the power cord from the power source before servicing the range.

Read More
Joey S -
Sears Technician
May 09, 2014
See more answers

Top Parts