Model #359 HUSQVARNA Chainsaw, Gas

  • Guard,side Cvr,clutch,oiler,cylindercvr Assy
    3 Results
  • Cylinder Assy
    3 Results
  • Crankshaft,muffler,carb,air Filter
    3 Results
  • Crankcase Assy
    3 Results
  • Handle (body) Assy
    3 Results
  • Flywheel & Ign, Starter Assy
    3 Results
  • Carb Assy
    3 Results
  • Accessories, Cylinder Kit
    3 Results
  • Crankcase Housing
    3 Results
  • Parts Lists
    3 Results
Find part by diagram >

Question and Answers


I ran the Machine diagnotic program and it failed on C:01 and C:06. 11044832200 Kenmore Elite Automatic washer horizontal axis


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your washer is not working properly.
Motor Continuity Test

Disconnect the wire harness
from the motor and measure the
resistance of the motor. Use the
following table:
Pins Results
1 to 2
2 to 3
1 to 3 
Normal = approx. 6 ?
Abnormal = Infinity

Fill by cold water inlet valve.
What needs to be checked:
? Flowmeter
? Cold water inlet valve 

C:06 Drain pump is ON.
? Drain pump

Water Temperature Sensor
Disconnect the wire harness from
the water temperature sensor and
measure the resistance of the
sensor. Use the following table.
An abnormal condition is an open
Temp. Results
32°F / 0°C 35.9K ?
86°F / 30°C 9.K ?
104°F / 40°C 6.6K ?
122°F / 50°C 4.6K ?
140°F / 60°C 3.2K ?
158°F / 71°C 2.3K ?
203°F / 96°C 1K ?

I recommend checking the water temperature sensor and the motor. 
If those check out good then I recommend a service technician. It may be the electronic control itself. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
May 28, 2015

Part #359 Ice Bucket Glide for PSCS3TGXCFSS GE Profile Refrigerator PSCS3TGXCFSS Ge Refrigerator x series


Thanks for the inquiry and for using
You're right, the site doesn't make it friendly to determind the side specific guide needed. The left guide is part number WR72X10240 and the right guide is part number WR72X10241. Sorry for the inconvenience with that not being identified in the parts list.
Hope this helps and thanks for using

Read More
Jeff Wallace Sr -
Sears Technician
April 14, 2014

F-24 error code -- Kenmore HE 2Plus front loader washer 11047531701 Kenmore Residential washer


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is trouble with the washer.

Glad to help out.   Im  looking at your Kenmore model number 110.47531701.
I see you  have the F24 code so let me give you all the detailed information from the technical book that it gives to me.
Details of F24:
If the water temperature sensor value is out of range (23F to 217F or -5C to 103C) during the water-heating step of the wash cycle.  NOTE:  To find the correct ohm reading refer to the water sensor section, page 10.
1.  Unplug washer or disconnect power.
2.  Check the water temperature sensor and connection to it.
3.  Check resistance of heating element, if present on this model.  (abnormal = infinity).
4.  Refer to the water temperature sensor section page 10.
PAGE 10:
1.  Unplug washer or disconnect power.
2.  Disconnect the wire harness from the water temperature sensor and measure the resistance of the snesor.  Use the following table.   An abnormal condition is an open circuit:
   32f (0C) 35.9K OHMS  
  86F (30C)  9.7k oHMS
 104F (40C)  6.6K  OHMS
 122F (50C)                               4.6K OHMS
 140F (60C)                               3.2K OHMS
 158F (71C)   2.3K OHMS
 203F (96C)                                1K OHMS
 If you have further questions please let me know.
Thanks for choosing Sears

Read More
Larry L -
Sears Technician
December 02, 2013