Model #358797290 CRAFTSMAN Blower, Gas

  • Sears Model 358.797290
    3 Results
  • Crankcase Assembly
    3 Results
  • Carburetor Assembly
    3 Results
  • Vacuum Tube Assembly
    3 Results
  • Gutter Attachment Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

Can't figur out hoow to remove handle from my craftman blower/vac 35879720

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your blower and I do understand your frustration. Glad to help out. I'm looking at your model number 358797290 and here is a link for a video that will help with the repair.  Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
February 12, 2015
A:

Your video link did not answer the question. Have you look at the videos???

Read More
Robert -
November 21, 2015
See more answers
Q:

Replacing Fuel lines

A:

When it comes to replacing parts on your tool it can be really frustrating especially without instructions. While you are waiting on an expert to answer your question, I found your owner's manual in the Manage My Life website and it can help you with your replacing. I have attached the link below. Hope this helps!

Read More
Dezeray S -
April 04, 2012
A:

Thank you for your question.

I am sorry; we do not have written instructions for the routing of the fuel lines on your product. Our technicians are thought the basic routing because the routing cannot change much from year to year. If you have one large fuel line and one smaller this eliminates some chance for error. If you have 2 small fuel lines to the carburetor connect them and start the engine. Reversing the fuel lines will not prevent the engine from starting. If you have them connected backwards, the engine will start and die. Reverse them and you will be correct.

The routing of the fuel lines vary from model to model. Keep in mind that the primer bulb circulates fuel from the tank, through the carburetor, and back into the fuel tank. One line goes from the fuel tank to the carburetor. One line goes from the fuel tank to the primer bulb, from the primer bulb to the carburetor, and back to the fuel tank. The small line in the fuel tank should have the filter attached to it. I have added a sketch below of how the fuel should flow in the circuit.

I have found a video I think will be useful. Please click here to watch a video on how the fuel lines are routed. If you need further assistance, please submit more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 05, 2012
A:

Mark, I did indeed have my fuel lines reversed. While I had apart went ahead and cleaned carb too. Running great now. Thanks for your help!

Read More
jeff -
May 09, 2013
A:

jeff, I am glad to hear you found the problem with the unit. I hope you continue to have years of service out of this. Now that the gasoline is blended with ethanol I recommend using a fuel mix with a fuel stabilizer. It will help prevent the fuel from going bad as fast. Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
May 11, 2013
A:

when you replace the fuel lines and need to put the in tank fuel filter on how do you get the fuel line in and the filter attached?

Read More
Marlin -
October 27, 2015
See more answers
Q:

part# 530016207 358797290 Craftsman Gas blower

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

Looking at the information I'm showing that there is a clamp that holds on the blower tube. If you were to reference the parts brake down page you would see that key number 35, 36, and 37 are all the clamp parts you need. You can look at the parts break down on our website, click here to view that now. The part numbers for these parts is (clamp) 530095592, (Knob) 530049885, and (Bolt) 530015820.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
May 05, 2015

Top Parts