Model #358795310 CRAFTSMAN Line Trimmers/Weedwackers, Gas

  • Driveshaft/handle/shield
    3 Results
  • Cylinder/crankshaft/crankcase
    3 Results
  • Carburetor Kit #530069770
    3 Results
Find part by diagram >

Question and Answers

Q:

gas tank removal 358795310 Craftsman Gas, line trimmers/weedwackers

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

fuel line routes for weedwacker

A:

Hello, I see that you need to locate the fuel lines on you Craftsman gasoline weed wacker. What I find is very helpful is to view my owners manual here on Manage My Life they have many helpful tools, If you scroll to the top of the web page click on the "manuals" button then enter your manual number and you owners manual will come up. I have included the link below. Hope this helps!

Read More
Salina L -
July 26, 2010
A:

I have attached a photo depicting how the fuel lines are to be ran. If the lines are installed incorrectly, the machine will not run.

Read More
XX Wade_ -
Sears Technician
July 27, 2010
A:

Salina, i printed the manual, but it doesn't show how to fix it, just how to work it and maintain it, thanks

Read More
Alan -
August 26, 2011
A:

Wade, so both lines push into the gas tank, and the lighter one has to go into the fuel filter? is that correct?

Read More
Alan -
August 26, 2011
A:

Here is another diagram

Read More
Jeff -
August 02, 2013
See more answers
Q:

I have a weed wacker 358.795210. need to know length and how to run new fuel lines. also no spark at spark plug Thanks

A:

Good morning.... I can understand your desire for instruction. If you are not getting any spark I would suspect the ignition coil. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. The second link will provide you with fuel line information. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your weed whacker and have a nice day.

Read More
Henry -
April 07, 2013
A:

Thank you for your question. I am sorry; we do not have written instructions for the routing of the fuel lines on your product. Our technicians are thought the basic routing because the routing cannot change much from year to year. If you have one large fuel line and one smaller this eliminates some chance for error. If you have 2 small fuel lines to the carburetor connect them and start the engine. Reversing the fuel lines will not prevent the engine from starting. If you have them connected backwards, the engine will start and die. Reverse them and you will be correct. The routing of the fuel lines vary from model to model. Keep in mind that the primer bulb circulates fuel from the tank, through the carburetor, and back into the fuel tank. One line goes from the fuel tank to the carburetor. One line goes from the fuel tank to the primer bulb, from the primer bulb to the carburetor, and back to the fuel tank. The small line in the fuel tank should have the filter attached to it. I have added a sketch below of how the fuel should flow in the circuit.  I have found a video I think will be useful. Please click here to watch a video on how the fuel lines are routed.  If you need further assistance, please submit more details.  If the engine is not getting spark I recommend accessing the ignition coil first. Then remove the small wire from the ignition coil. After the wire is disconnected, recheck for spark. If you have spark the problem is in the kill circuit. There is either a shorted wire or defective kill switch. If you do not have any spark with the kill wire disconnected, I recommend replacing the ignition coil.     If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears  technician.  Here is a link that will provide the nearest drop-off locations:  Sears Home Services.   Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
April 09, 2013
See more answers

Top Parts