Model #358794120 CRAFTSMAN Blower, Gas

  • Housing/handle/fuel Tank
    3 Results
  • Cylinder/crankshaft/crankcase
    3 Results
Find part by diagram >

Question and Answers

Q:

Cawl Part needed 358794120 Craftsman Blower

A:

Thanks for the inquiry and for being a valued member.

The part you are referring to is the starter pawl. It's what engages the flywheel to start the engine when the rope is pulled. This unit is not designed with the starter pawl offered individually. It looks like its integrated with the starter pulley, part number 530054425. The best thing you can do is disassemble the unit before ordering parts and see exactly where the issue is. A close visual inspection will usually show what's worn or what needs replacement. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 12, 2015
Q:

primerbulb 358794120 Craftsman Blower

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the part for your Craftsman Gas Blower model 358794120. I am so sorry the primer bulb needs to be replaced and that you have had trouble locating the replacement part. I will be happy to help you with this.

In this situation, the manufacturer only provided the primer bulb as part of the carburetor assembly. I have located that part for you and have included the link below for you to view and order it. Please note that the carburetor has been substituted by the manufacturer. It may look a little different, but  it is the manufacturer’s guaranteed replacement for your blower.

Carburetor Assembly for Craftsman Blower model 358794120

I hope this answers your question. Thank you for choosing Sears, we appreciate your business.

  

Read More
Rachel Morgan -
Sears Technician
October 11, 2014
Q:

Gas Blower starter recoil is locking up model 358794120

A:

I can understand your concern when it comes to your blower, while you are waiting for the experts response I have provided you below a couple of links to Manage my life where some customers posted similar questions like yours that may be helpful to you. Hope it helps!

Read More
Maira E -
September 29, 2010
A:

It looks like there were some issues early on with these models and the piston rings. I have a feeling the piston may be seized in the cylinder. Even if the starter assembly were backwards it should still at least spin to pull out.

More than likely I think you will find that the engine has seized. You can take the spark plug out and shine a flashlight down in the hole while you pull on the cord to see if you can see the piston move any at all. If the piston is seized the only thing that can be done is to rebuild the engine. Depending on price, you may be money ahead to replace the whole machine. I would take in for service to verify just to be sure though.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
September 30, 2010
See more answers

Top Parts