Model #358362180 CRAFTSMAN Chainsaw, Gas

  • Cylinder/crankcase/crankshaft
    3 Results
  • Shield/starter Housing/bar
    3 Results
  • Rear Tank/handle
    3 Results
Find part by diagram >

Question and Answers

Q:

chain saw repair sears model#358362180

A:

I'm sorry to hear that you are having some difficulties with your Craftsman Chainsaw. I did some research for you at Managemylife.com and found an excellent article that may help until your expert can respond to your specific question. The link is attached below.

Read More
James -
December 28, 2011
A:

Thank you for your question.

I will be happy to assist you with the repair of the saw. If you could reply below with details of the problem you are having I give you my advice on how to repair it.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 29, 2011
See more answers
Q:

Chain brake assembly diagram.

A:

I'm sorry that you are having difficulties with your chainsaw. I did some research for you at searspartsdirect.com and found your chain saw.The link will provide schematics and diagrams that I hope will help. This link should assist you until your expert can respond. I have attached the link below.

Read More
James -
March 29, 2011
A:

I have attached a photo of the chain brake assembly. The manufacturer recommends you replace the entire chain brake if it has come apart and there is any question as to its integrity as it is a safety feature.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
March 31, 2011
See more answers
Q:

Carburetor screw

A:

I'm sorry that you are having difficulties with your chainsaw. I did some research for you at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below.

Read More
James -
January 04, 2011
A:

The only screw on this carburetor that can be adjusted is the idle screw. The carburetor is an EPA certified carburetor for California use. It cannot be tuned or adjusted outside of where it was set at the factory when manufactured. Saying that to say this: This carburetor is not adjustable and because of that there is no information published on it.

Adding to the confusion with this, there are several screw types on the market for these style carburetors and we are not told what type screw is on this particular one. For the most part, if there is a problem with the carburetor it will need to be replaced. The EPA restrictions on certain machines are quite strict and the fuel systems cannot be altered.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
January 06, 2011
See more answers