Model #358360681 CRAFTSMAN Chainsaw, Gas

  • Chassis/chain/bar/handle
    3 Results
  • Cylinder/shield/crankshaft
    3 Results
Find part by diagram >

Question and Answers

Q:

Does a primer bulb with cuts on top make the chain saw sputter and turn off? 358360681 Craftsman Chainsaw

A:

Thank you for choosing Sears, I will be more than happy to assist you with your Craftsman chainsaw.

To answer your question yes the primer bulb can cause this sputtering and shutting off. I would also recommend checking the fuel lines and carburetor to make sure everything is flowing properly.  I’d recommend replacing the primer first, which is part number 530047721.

I hope you found this information helpful. Thank you for choosing Sears Parts Direct. We appreciate your business. Have a nice day.

Read More
Samantha A -
Sears Technician
November 10, 2014
Q:

My Craftsman chainsaw wont start. It is a model 358-360681.

A:

The on/off switch might be partially grounding the ignition module out. Remove the top cover of the engine and disconnect the kill wire from the ignition module. If the engine starts with the kill wire disconnected, the switch is bad.

If the engine does not start with the kill wire disconnected, you should take the saw to a Sears Parts and Service Center or a Sears Retail Store for repair.

Read More
Jimmy K -
Sears Technician
October 21, 2009

Top Parts