Model #358360150 CRAFTSMAN Chainsaw, Gas

  • Flywheel/chassis
    3 Results
  • Crankcase
    3 Results
  • Carburetor #530069703 Wt-324
    3 Results
Find part by diagram >

Question and Answers

Q:

SEARS 18" chain saw will not run at Idle 358360150

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the chainsaw idling. I know how frustrating that is to have.

This is typically an internal carburetor issue. You may have an air passageway blocked or a partially clogged fuel jet. There is a carburetor rebuild kit (part number 530069826) available, but for the cost versus a replacement carburetor (part number 545081885), it would be worth it in my opinion to purchase the replacement carburetor. I suspect this will solve your issue.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 27, 2014
Q:

how to replace tooth drum assembley 358360150 Craftsman Chain saw

A:

Thanks for the inquiry and for being a valued member.
I have attached some instructions below showing the removal of the clutch on most Craftsman chainsaw models. You can stop the engine from turning while you remove the clutch by removing the spark plug and filling the cylinder with new (not soiled) soft rope. The rope will jam the piston while you unscrew the clutch. Turn the clutch clockwise to remove it.



I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 14, 2014
Q:

Inasmuch as no original chain bars are available for this saw can I use a regular 18" bar 358360150 Craftsman Chain saw

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when needing parts for the chain saw
 
Glad to help out.   Im  looking at your Craftsman Chain Saw model number 358.360150.

I double checked also for the bar in my factories and in my research program and they are no longer available to get from us.

You cannot just use any 18 inch bar because with the chan it matters on the depth, groove, and pitch.

The part number for the bar you need is 71-36618.  I would use that number and put it in your search engines like google or bing.   YOu might get lucky so worth a try.

Sorry again for the bad news but wish you luck.

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com.
 


Read More
Larry L -
Sears Technician
March 07, 2014

Top Parts